3NH YT4500-P3 split dual-use Coating Thickness Gauge
YT4500-P3
-
CHINA CTG-800-1500FN Paint Layer Thickness Gauge, Integrated dual-use Standard Type$ 204.00SE -
IPRE CT400 magnetic Induction eddy Current Coating Thickness Gauge Measurement range 0~1500μm$ 254.00SE -
IPRE CT150 Coating Thickness Gauge Measurement range 0~1500μm$ 234.00SE -
IPRE CT300 paints film thickness Measurement Instrument magnetic Induction/eddy Current dual-use$ 371.00SE
3NH YT4500-P3 Split dual-use Coating Thickness GaugeSPEC
3NH YT4500-P3 Split dual-use Coating Thickness GaugeDetails
3NH YT4500-P3 Split dual-use Coating Thickness GaugePacking list
- SKU
- NB035788
- Standards
- ASTM B499,ASTM D1400;ISO 2178,ISO 2360，ISO 2808;GB/T 4956/4957,JB/T 8393
- matrix material
- Fe/NFe
- Probe position
- Split
- Resolution
- 0.1μm|1μm
- Measurement range
- 0~1250μm
- margin of error
- Zero correction : +/- ( 3% H + 1) μm; two-point correction : +/- ( 1~ 3% H + 1.5) μm; Note: H is the sample thickness
- Small measurement size
- Magnetic: 10 × 10mm; nonmagnetic: 10 × 10mm
- Minimum substrate thickness
- Magnetic: 0.2mm; nonmagnetic: 0.05mm
- Minimum radius of curvature
- Convex radius 5mm; Concave radius 10mm
- Unit display
- μm
- Power Supply
- 2 AA alkaline batteries or NiMH rechargeable batteries;
- Dimensions
- 102*66*24mm
- Weight
- 99G (including battery)
- Operating temperature
- 0~40 ℃ (10~90% RH without condensation)
- Storage temperature
- -10~50℃
- Standard Accessories
- 2 substrates (iron substrates, aluminum substrates), wristband, calibrated test piece
- Optional accessories
- Calibrated specimens (12 μm, 25 μm)
Introduction
YT4500 is a domestic (CN) coating Thickness Gauge manufactured by 3nh company, which can quickly and accurately non-destructively test the coating thickness applied to metal substrates. The instrument fully conforms to the magnetic method and eddy current test principle specified in ISO 2178, ISO 2360, GB/T 4956, GB/T 4957, ASTM B499 and other standards.
Application industry
Fe-based probes can detect the thickness of various non-magnetic coatings sprayed on various magnetic substrates (such as steel), such as paint layer, powder coating layer, porcelain coating layer, chrome coating layer, copper coating layer, zinc coating layer, etc.
NFe-based probes inspect all insulating coating thicknesses, such as paint, powder, porcelain, etc., applied to non-magnetic metal substrates (e.g., aluminum, copper, brass, stainless steel, etc.).
Features
a. It can quickly and accurately test the coating thickness of a variety of magnetic metal substrates (magnetic method) and non-magnetic metal substrates (eddy current method);
b. The probe and the host are separated, and the adaptability is stronger;
c. It can quickly and automatically identify ferrous substrates and non-ferrous substrates, and test with one click;
d. The instrument can be accurately calibrated by using two methods: single-point calibration and multi-point calibration;
e. Low power consumption is more power saving, low power alarm;
f. With backlit display, buzzer prompt;
g. High wear-resistant probe, not less than 800,000 measurements;
h. Multiple measurement modes: single point measurement, continuous measurement;
- 1Application of nondestructive testing coating thickness in Coating construction
- 2Principle and Application Scope of Copper Plate Magnetic Induction Thickness Gauge
- 3Principle and Application Analysis of Silver Plating Thickness Gauge
- 4Basic principle and application scenario of steel Coating Thickness Gauge