United States

RDS 29 #3/8 "Mayer Rods Wire Spreader 66.3μm

SE
Wire-wound, wet film thickness 66.3μm, diameter 9.52mm, Total length 400mm, Spreader width 300mm, hand width 50 + 50mm, material stainless steel, Wire diameter 0.74mm.
$161.00/piece
PromotionLoading...
Coupon
Model：
Certificate
Contact
Details SPEC Con VIDEO CAT OI
Similar products

RDS 29# 3/8" Applicator rod 3/8 "SPEC

RDS 29# 3/8" Applicator rod 3/8 "Details

RDS 29# 3/8" Applicator rod 3/8 "Packing list

SKU
NB036455
Production process
Wire-wound
WFT
66.3μm
diameter
9.52mm
Total length
400mm
Application width
300mm
grip width
50+50mm
material
stainless steel
Wire diameter
0.74mm
29# 3/8"
Applicator rod 3/8 "
Wire-wound, wet film thickness 66.3μm, diameter 9.52mm, Total length 400mm, Spreader width 300mm, hand width 50 + 50mm, material stainless steel, Wire diameter 0.74mm.
RDS 29 #3/8 "Mayer Rods Wire Spreader 66.3μm Picture

RDS coating Rods Figure 1

RDS coating Rods Figure 2

RDS coating Rods Figure 3

RDS coating Rods Figure 4

RDS coating Rods Figure 5

RDS coating Rods Figure 6

RDS coating Rods Figure 7

RDS coating Rods Figure 8

RDS coating Rods Figure 9

RDS coating Rods Figure 10



FAQ
QI want to apply a wet-film of about 60 microns, which is mainly used for Coating and inks testing. Which bar should I choose?
A Recommended RDS #29 3/8 "bar, its wet film thickness is exactly 66.3 microns, especially suitable for the Coating inks industry. Made of stainless steel, this application width 300mm is a standard size commonly used in laboratories, making it easy to operate.
QWe mainly want to try it in our own laboratory and measure some physical and chemical properties after Spreader But we don't know much about Spreader.
A As long as the viscosity of the object to be tested is not high and does not exceed 1000cps, and does not contain large particle size particulate matter (PM), the coating rod can be used as the Spreader. For specific selection, please refer to: https://www.nbchao.com/k/388/
QSolvent type acrylate Adhesive, the viscosity range of the glue is about 10000, can I use Mayer Rods?
A Viscosity is too high, use doctor blade Applicator.
QApplicator rod for latex paint hiding power?
A The coverage rate depends on the specific material. If it can be fully covered, of course, the thinner the better. But the hiding power of different materials is different, which also causes your selection to be different from Miscellaneous. For details, please consult technology.
QGloss oil and white paints on Glass
A You can apply it. Please select the corresponding model for specific wet film thickness control.
Knowledge
Standard
Filter Brand Store Contact