HONGKE DHG-9030 electric thermostatic Forced Air Drying Oven blast oven 300 ℃ high temperature oven

DHG-9030

Electric thermostatic Drying Oven

Volume 40L, Temperature range + 10~300 ℃, Interior size 350 * 350 * 350mm, progressive heating, with self-tuning and tracking alarm function.

Introduction

DHG-9000 series electric heating constant temperature Forced Air Drying Oven has four specifications of 40 liters, 70 liters, 136 liters and 220 liters in volume, beautiful and practical. The outer shell is welded by high-quality steel plates, the surface is sprayed, and the inner steel plate is sprayed with high-temperature resistant silver powder paint or stainless steel plates, with two to four shelves. Ultra-fine glass wool is used for temperature insulation, double-layer glass observation windows are installed on the door, and heat-resistant silicone rubber or asbestos rope is installed on the working room and the door for temperature insulation and sealing. The power switch, temperature controller and other operating parts of the drying box are all concentrated in the front of the box for easy operation.

The heating and constant temperature system in the box is composed of an electric heater, a temperature controller, a fan, and a suitable air duct structure. When the power is turned on, the fan works at the same time, and the heat generated by the electric heater is discharged through the air duct, and then sucked into the fan after passing through the dry items in the working room, so that the temperature can be uniformed through continuous circulation.

The temperature controller is a microcomputer intelligent digital temperature controller. It adopts progressive heating to suppress the temperature overshoot to the greatest extent. It has a self-tuning function, high temperature control accuracy, a protection device for the set temperature, and a tracking alarm function.

Application

This product is equipment used for drying, baking, melting wax, and sterilizing . It is suitable for scientific research and production in the fields of factory production experiments, medical research, health and epidemic prevention, drug inspection, environmental protection, and rural science.

Model Selection

Precautions

1. The shell of the drying box needs to be effectively grounded to ensure safe use.

2. The drying box should be placed in a room with good ventilation conditions, and no flammable and explosive materials can be placed around it or in the box.

3. Do not overcrowd the items in the box, and leave space.

4. The inside and outside of the box should be kept clean. If it is not used for a long time, it should be covered with a plastic dust cover and placed in a dry room.

Packing list：complete-built unit X1, manual X1, certificate of conformity X1, warranty card X1

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.