Japan OSP-00/400 Applicator rod WFT 0μm length 400mm
SE0μm ultra-thin film, threadless smooth coating rod, the Total length is 400mm, the effective application width is 300mm, stainless steel material, good surface finish.
$172.00/piece
PromotionLoading...
Coupon
Model：
OSP-00/400
Similar products
OSP OSP-00/400 coating rodSPEC
OSP OSP-00/400 coating rodDetails
OSP OSP-00/400 coating rodPacking list
- SKU
- NB003682
- Production process
- Formed
- WFT
- 0μm
- diameter
- 10mm
- Total length
- 400mm
- Application width
- 300mm
- Grip width
- 50+50mm
- material
- 304 stainless steel
OSP-00/400
coating rod
0μm ultra-thin film, threadless smooth coating rod, the Total length is 400mm, the effective application width is 300mm, stainless steel material, good surface finish.
Japan OSP -00/400 coating rod is extrusion type coating rod, OSP-00/400 coating rod can coat film thickness of 0μm, realize ultra-thin film coating. The OSP L400 coating rod adopts a special cold extrusion process to process the steel rod into a coating rod with continuous grooves, so there is no worry of broken wires and it is very convenient to clean. OSP-00/400 coating rod is hand-held. 50mm .
Optional
 |
|
 |  |
Note: Click on the accessory picture to view Details.
FAQ
QCan this coating rod be prepative of multi-layer ultra-thin film?
A
The wire rod can be prepared for 1.5 micron ultra-thin film. Everyone must know it, but another advantage of it is multi-layer film, which is much better than I-shaped film applicator. But multi-layer film tests the flatness of the previous layers of film drying. Generally, the film thickness (such as less than 10 microns/layer) is too thin to control. The wire rod with Film Applicator is a very good solution, eliminating the problem of uneven pressure and speed of hand scraping.
QDo you have the film scraper required by ASTMD823 standard?
A
This OSP-00/400 film scraper will do.
QWhat is the purpose of OSP0 Smoothing Rods? What is the difference from the groove one?
A
Smoothing Rods without grooves, mainly used for pre-quantification on paper printing or Plastic film, coated Film thickness is controlled by pressure, Spreader effect without scratches possible.
QWhat is the wet film thickness of OSP-00? Then what is this smooth scraper generally used for?
A
OSP-00 wet film thickness is 0, Smoothing Rods in daily customer use is not mainstream, the lowest is 1.5um, customers use Smoothing Rods more because of ultra-thin or covering power has an intuitive display.
Knowledge
- 1Bar Spreader Technology: Principles, Applications and Advantages over Miscellaneous coating methods
Standard
- 1GB/T 1727-2021《General methods for preparation of coating films》
- 2GB/T 7044-2022《Colour carbon black》
- 3HG/T 5370-2018《Waterborne coatings for bicycles》
- 4HG/T 3951-2007《Water based colorants for architectural coatings》
- 5GB/T 13217.1-2020《Test method for colour and tinctorial strength of ink》
- 6GB/T 13217.1-2009《Test method for colour of liquid ink》
- 7GB/T 26461-2011《Gravure ink for paper》
- 8ASTM D823-2018《Paints, varnishes and related products of uniform thickness on the test board》