Japan

Japan OSP-00/400 Applicator rod WFT 0μm length 400mm

SE
0μm ultra-thin film, threadless smooth coating rod, the Total length is 400mm, the effective application width is 300mm, stainless steel material, good surface finish.
$172.00/piece
PromotionLoading...
Coupon
Model：
Certificate
Contact
Details SPEC Con VIDEO CAT OI
Similar products

OSP OSP-00/400 coating rodSPEC

OSP OSP-00/400 coating rodDetails

OSP OSP-00/400 coating rodPacking list

SKU
NB003682
Production process
Formed
WFT
0μm
diameter
10mm
Total length
400mm
Application width
300mm
Grip width
50+50mm
material
304 stainless steel
OSP-00/400
coating rod
0μm ultra-thin film, threadless smooth coating rod, the Total length is 400mm, the effective application width is 300mm, stainless steel material, good surface finish.
Japan OSP-00/400 Applicator rod WFT 0μm length 400mm Picture


Japan OSP -00/400 coating rod is extrusion type coating rod, OSP-00/400 coating rod can coat film thickness of 0μm, realize ultra-thin film coating. The OSP L400 coating rod adopts a special cold extrusion process to process the steel rod into a coating rod with continuous grooves, so there is no worry of broken wires and it is very convenient to clean. OSP-00/400 coating rod is hand-held. 50mm .

OSP-00 coating rod operation video

OSP Coating Stick Model List

Three length sizes of OSP-00 coating stick

Features and advantages of OSP-00 coating stick

OSP-00 Coating Rod Groove Shape

Coating accuracy of OSP-00 coating rod

Applications of OSP-00 coating stick

The advantages of purchasing OSP-00 coating sticks and choosing the North and South Tide

OSP-00 coating stick real shot picture 1

OSP-00 coating stick photo 2

OSP-00 coating stick photo 3

Optional

Wire Rod Cleaning Machine

LABOratory automatic coating machine

Coating film test jamRK imprint bed

Note: Click on the accessory picture to view Details.

FAQ
QCan this coating rod be prepative of multi-layer ultra-thin film?
A The wire rod can be prepared for 1.5 micron ultra-thin film. Everyone must know it, but another advantage of it is multi-layer film, which is much better than I-shaped film applicator. But multi-layer film tests the flatness of the previous layers of film drying. Generally, the film thickness (such as less than 10 microns/layer) is too thin to control. The wire rod with Film Applicator is a very good solution, eliminating the problem of uneven pressure and speed of hand scraping.
QDo you have the film scraper required by ASTMD823 standard?
A This OSP-00/400 film scraper will do.
QWhat is the purpose of OSP0 Smoothing Rods? What is the difference from the groove one?
A Smoothing Rods without grooves, mainly used for pre-quantification on paper printing or Plastic film, coated Film thickness is controlled by pressure, Spreader effect without scratches possible.
QWhat is the wet film thickness of OSP-00? Then what is this smooth scraper generally used for?
A OSP-00 wet film thickness is 0, Smoothing Rods in daily customer use is not mainstream, the lowest is 1.5um, customers use Smoothing Rods more because of ultra-thin or covering power has an intuitive display.
Knowledge
Standard
Filter Brand Store Contact