China

ZHANYI No. 10 Applicator rod film thickness 10μm 400mm rod length

SE
Formed coating rod, film thickness is 10μm, diameter 10mm, Total length 400mm, application width 320mm, hand width 40 + 40mm, material stainless steel.
Model：
Certificate
Contact
Details SPEC VIDEO CAT OI
Similar products

ZhanYi ZY-10/400 Mayer RodsSPEC

ZhanYi ZY-10/400 Mayer RodsDetails

ZhanYi ZY-10/400 Mayer RodsPacking list

SKU
NB003684
Production process
Formed
WFT
10µm
diameter
10mm
Total length
400mm
Application width
320mm
Grip width
40+40mm
material
stainless steel
ZY-10/400
Mayer Rods
Formed coating rod, film thickness is 10μm, diameter 10mm, Total length 400mm, application width 320mm, hand width 40 + 40mm, material stainless steel.
ZHANYI No. 10 Applicator rod film thickness 10μm 400mm rod length Picture

Zhanyi No. 10 coating rod is an extruded domestic (CN) wire rod, the thickness of the coating film is 10 microns, and the coating film accuracy is 1 μm. The Total length of the No. 10 coating rod is 400mm, and the effective coating width is 320mm. Zhanyi No. 10 coating stick is suitable for coating proofing in laboratories of coatings, inks and other industries. It has the advantages of good wear resistance and easy cleaning.

Operation animation video of Zhanyi No.10 coating stick

Zhanyi No.10 Coating Rod Specifications

Features and advantages of Zhanyi No.10 coating stick

Applications of Zhanyi No.10 Coating Rod

Zhanyi No.10 Coating Rod Actual Photo 1

Zhanyi No.10 coating stick real shot picture 2

Optional

Wire Rod Cleaning Machine

LABOratory automatic coating machine

Coating film test jamRK imprint bed

Note: Click on the accessory picture to view Details.

FAQ
QFind a Mayer Rods for GB/T13217.7
A This ZY-10/400 Mayer Rods is it.
QIs it feasible to prepare PTFE/PP composite diaphragm with Mayer-Rod?
A Yes, by diluting to a reasonable PTFE emulsion, Stir a suitable binder uniformly, a single-layer film is prepared on the PP film, and after the composite diaphragm is initially dried, it is placed in a 60 ° C constant temperature bellows for drying, and the solvent evaporates. It is worth PTFE/PP composite diaphragm.
QThe solid content of the paint is 46%. If you want to scrape the ink and dry 5 microns, can this be done?
A Can be done
QWe need 10 micron dry film. Is this Printing ink scraper suitable? Thanks.
A This scraper is used for Printing ink to scrape the coating thickness of 10 micron wet film. The actual dry film after drying is determined by your Printing ink Solid content ratio. Solid content is absolutely < 100%, so it can be determined that you want to scrape 10 micron dry film, it is recommended to use a higher rod number.
Standard