Japan

Japan OSP-07/400 Applicator rod WFT 7μm length 400mm

SE
Imported formed coating bar, film thickness 7μm, suitable for automotive coatings, Plastic film, printing and R & D units and other fields, the Total length of the rod is 40cm.
$172.00/piece
PromotionLoading...
Coupon
Model：
Certificate
Contact
Details SPEC Con VIDEO CAT OI
Similar products

OSP OSP-7/400 coating rodSPEC

OSP OSP-7/400 coating rodDetails

OSP OSP-7/400 coating rodPacking list

SKU
NB003714
Production process
Formed
WFT
7μm
diameter
10mm
Total length
400mm
Application width
300mm
Grip width
50+50mm
material
304 stainless steel
OSP-7/400
coating rod
Imported formed coating bar, film thickness 7μm, suitable for automotive coatings, Plastic film, printing and R & D units and other fields, the Total length of the rod is 40cm.
Japan OSP-07/400 Applicator rod WFT 7μm length 400mm Picture


Through technology research and development, OSP adopts the extrusion process, and finally develops the extrusion coating rod. The coating rod has the characteristics of continuous thread, easy cleaning and high cost performance.

The Japanese OSP-07/400 film scraping rod 7μm precise wet film preparation is widely used by automotive coatings, plastic films, printing and R&D units.

OSP-07 coating rod operation video

List of models of OSP-07 coating stick

Specification and size of OSP-07 coating stick

Features and advantages of OSP-07 coating stick

OSP-07 coating stick groove shape

OSP-07 Coating rod with high coating precision

Application of OSP-07 coating stick

Buy OSP-07 coating stick and choose NBCHAO Mall

OSP-07 coating stick real shot picture 1

OSP-07 coating stick real shot picture 2

OSP-07 Coating stick handle real shot

Optional

Wire Rod Cleaning Machine

LABOratory automatic coating machine

Coating film test jamRK imprint bed

Note: Click on the accessory picture to view Details.

FAQ
QCan this coating rod be prepative of multi-layer ultra-thin film?
A The wire rod can be prepared for 1.5 micron ultra-thin film. Everyone must know it, but another advantage of it is multi-layer film, which is much better than I-shaped film applicator. But multi-layer film tests the flatness of the previous layers of film drying. Generally, the film thickness (such as less than 10 microns/layer) is too thin to control. The wire rod with Film Applicator is a very good solution, eliminating the problem of uneven pressure and speed of hand scraping.
QDoes this film scraper conform to GB/T26461 standard?
A The film scraper is suitable for GB/T26461, please consult customer service for detailed application definition
QAdhesive coating, any suggestions?
A The preparation of Adhesive coating is applicable to the Mayer-Rod principle, and Mayer Rods coating can be used. The thickness of the prepared Adhesive coating can be controlled by itself. In general, Adhesive can be properly diluted (such as ethyl acetate), and then coated on BOPP film or Miscellaneous substrate.
Knowledge
Standard
Filter Brand Store Contact