Japan

Japan OSP-07/250 formed Applicator rod WFT 7μm length 250mm

SE
The production process is formed, the wet film thickness is 7μm, the diameter is 10mm, the Total length is 250mm, the application width is 250mm, the grip width is 0, and the material is 304 stainless steel.
$152.00/piece
PromotionLoading...
Coupon
Model：
Certificate
Contact
Details SPEC Con VIDEO CAT OI
Similar products

OSP OSP-7/250 coating rodSPEC

OSP OSP-7/250 coating rodDetails

OSP OSP-7/250 coating rodPacking list

SKU
NB003715
Production process
Formed
WFT
7μm
diameter
10mm
Total length
250mm
Application width
250mm
Grip width
0
material
304 stainless steel
OSP-7/250
coating rod
The production process is formed, the wet film thickness is 7μm, the diameter is 10mm, the Total length is 250mm, the application width is 250mm, the grip width is 0, and the material is 304 stainless steel.
Japan OSP-07/250 formed Applicator rod WFT 7μm length 250mm Picture


Japan's OSP-07/250 Extrusion Coating Stick adopts the extrusion process, and finally develops the Extrusion Coating Stick. The coating rod has the characteristics of continuous thread, easy cleaning and high cost performance.

OSP-07 coating rod operation video

List of models of OSP-07 coating stick

Specification and size of OSP-07 coating stick

Features and advantages of OSP-07 coating stick

OSP-07 coating stick groove shape

OSP-07 Coating rod with high coating precision

Application of OSP-07 coating stick

Buy OSP-07 coating stick and choose NBCHAO Mall

OSP-07 coating stick real shot picture 1

OSP-07 coating stick real shot picture 2

OSP-07 Coating stick handle real shot

Optional

Wire Rod Cleaning Machine

LABOratory automatic coating machine

Coating film test jamRK imprint bed

Note: Click on the accessory picture to view Details.

FAQ
QIs this for inks?
A Yes!
QOSP Mayer Rods is 250 long and the film is about 7μm?
A Hello, OSP-07/250 is a film Film thickness of 7 microns, film width of 250mm, total length of 250mm, can be purchased separately matching handle use.
QCan this coating rod be prepative of multi-layer ultra-thin film?
A The wire rod can be prepared for 1.5 micron ultra-thin film. Everyone must know it, but another advantage of it is multi-layer film, which is much better than I-shaped film applicator. But multi-layer film tests the flatness of the previous layers of film drying. Generally, the film thickness (such as less than 10 microns/layer) is too thin to control. The wire rod with Film Applicator is a very good solution, eliminating the problem of uneven pressure and speed of hand scraping.
QMeet GB/T26461 Applicator rod
A OSP-7/250 Applicator rod, please refer to it.
QAdhesive coating, any suggestions?
A The preparation of Adhesive coating is applicable to the Mayer-Rod principle, and Mayer Rods coating can be used. The thickness of the prepared Adhesive coating can be controlled by itself. In general, Adhesive can be properly diluted (such as ethyl acetate), and then coated on BOPP film or Miscellaneous substrate.
QCan you apply acrylic resin glue?
A Hello, yes, you can use the Spreader wet film if it suits you.
Knowledge
Standard
Filter Brand Store Contact