China

JINGKELIAN QXP 0-50μm ISO single-channe Fineness of Ground Gauge with Third Party Measurement Certificate

SE
ISO1524 single-channe Fineness of Ground Gauge, stainless steel, range 0 to 50 μm, scale unit μm, Graduation 5 µm, with third-party Measurement certificate. Suitable for fineness determination of 15 to 40 μm slurry.
$210.00/set
PromotionLoading...
Coupon
Model：
Certificate
Contact
Details SPEC Con VIDEO CAT
Similar products

JingKeLian QXP 0-50 ISO single-channe Fineness of Ground GaugeSPEC

JingKeLian QXP 0-50 ISO single-channe Fineness of Ground GaugeDetails

JingKeLian QXP 0-50 ISO single-channe Fineness of Ground GaugePacking list

SKU
NB037184
Scraper type
Single-channe
range
0 ~ 50µm
Scale unit
mm
Graduation
5µm
Scraper material
stainless steel
Scraper size
175*65*13mm
Groove size
140*12.5mm
Scraper size
90*40*6mm
Applicable standard
ISO1524-1983(E)
QXP 0-50
ISO single-channe Fineness of Ground Gauge
ISO1524 single-channe Fineness of Ground Gauge, stainless steel, range 0 to 50 μm, scale unit μm, Graduation 5 µm, with third-party Measurement certificate. Suitable for fineness determination of 15 to 40 μm slurry.
JINGKELIAN QXP 0-50μm ISO single-channe Fineness of Ground Gauge with Third Party Measurement Certificate Picture

The Fineness of Grind Gauge is manufactured in accordance with the relevant provisions of the international standard ISO1524-1983 (E), and is used for the determination of the particle size of paint and related products. There are two types of Fineness of Grind Gauge, single slot and double slot.

Models

Optional modelsMaximum rangeMinimum scale valueRecommended range
single slot100μm10μm40~90μm
50μm5μm15~40μm
25μm2.5μm5~15μm
double slot100μm10μm40~90μm
50μm5μm15~40μm

Accuracy standard

technical indicatorsScore standard errorGroove Ratio ErrorShape accuracySurface roughness
Rangeerrorratioerror
scrapersingle slot100μm< 2.5μm1.0138889<2.5μmfrontfront
50μm< 2.5μm1.9861111< 2.5μmflatness tolerance0.1
25μm<2μm3.9305556< 2μm0.012groove
double slot100μm<2.5μm1.0138889< 2.5μmLateral Straightness Tolerance0.2Ra=1.6
50μm<2.5μm1.9861111< 2.5μm0.001
scraperBlade Straight Tolerance2um
Surface roughnessRa0.4

Precautions

1. The front of the scraper can be used as a daily inspection of the straightness of the scraper;

2. Clean the scraper after use, apply anti-rust oil and put it in the box for storage;

3. The front of the scraper and the edge of the scraper must not be bumped;

4. The Grindometer should be calibrated in our factory after one year of use.


FAQ
QThis one can measure the agglomeration of precious metal pastes?
A The agglomeration degree of precious metal slurry, commonly known as fineness, refers to the size of the solid agglomerates in the slurry and is therefore appropriate.
Knowledge
Standard
Filter Brand Store Contact