China

CHINA Mayer Rods Ultrasonic Cleaner Applicator rod cleaning tank

SE
Applicator rod cleaning machine special cleaning tank, using 40Hz ultrasonic cleaning principle, does not hurt Mayer Rods, can be a good cleaning micron level wire-wound extrusion bar. NBchao specially selected film preparatory users.
$279.00/set
PromotionLoading...
Coupon
Model：
Contact
Details SPEC Con VIDEO OI

Factory PS-80 Wire Bar Ultrasonic CleanerSPEC

Factory PS-80 Wire Bar Ultrasonic CleanerDetails

Factory PS-80 Wire Bar Ultrasonic CleanerPacking list

SKU
NB037200
Inner slot size
500*300*150mm
Dimensions
550×330×280mm
Capacity
22L
Total Power
480W
Ultrasonic Frequency
40KHz
Heating power
500W
Timer
1-30Min
Temperature setting range
RT+20~80℃
Suitable for cleaning objects
RDS wire rod, OSP wire rod, RK wire rod, China wire rod, Film Applicator, etc
PS-80
Wire Bar Ultrasonic Cleaner
Applicator rod cleaning machine special cleaning tank, using 40Hz ultrasonic cleaning principle, does not hurt Mayer Rods, can be a good cleaning micron level wire-wound extrusion bar. NBchao specially selected film preparatory users.
CHINA Mayer Rods Ultrasonic Cleaner Applicator rod cleaning tank Picture

Application scope

Ultrasonic cleaning machines have very good advantages over other physical cleaning or chemical cleaning, so they are widely used in many fields such as service industry, electronics industry, pharmaceutical industry, laboratory, machinery industry, cemented carbide industry, chemical industry etc.

Instructions

Installation and preparation:

a) After unpacking, check whether the parts are loose;

b) Place the machine in a ventilated and dry place, ensuring that the machine is in a horizontal position;

c) Connect the power plug correctly and make sure the connection is firm (be sure to use a three-hole socket with a reliable ground wire to ensure safety)

d) Add appropriate amount of cleaning fluid as required for cleaning;

cleaning method:

Ordinary cleaning can be done with water. When the product has not been cleaned for a long time or there is a lot of dirt, please add appropriate cleaning fluid to enhance the super cleaning effect. Longer items can be cleaned in sections.

FAQ
QA washer with heating and timing functions is required. Does the PS-80 meet the requirements?
A Yes! PS-80 has 500W Heating power (adjustable at 20-80 ° C) and 1-30 minute timing function, heating can improve the activity of cleaning liquid, timing can be automated operation, especially suitable for laboratories and industrial scenes that require temperature control.
QCan Ultrasonic Cleaner put solvent?
A Corrosive materials are not allowed; If it is a flammable and explosive solvent, it cannot be heated. Generally, it is not recommended to use flammable and explosive solvents.
QWhat cleaning agent is used for cleaning?
A Usually inks with water.
QDo you need to heat it every time you clean it? When will such a large tank of water be heated?
A No, only when the material has requirements for temperature change, such as high viscosity of adhesives, the heating function needs to be turned on.
QIs it enough to have an Ultrasonic Cleaner?
A Not necessarily Oh, Different Frequencies are different, indiscriminate use may cause damage to precision instruments or cleaning is not clean.
QIs ultrasonic cleaning suitable for all objects?
A Ultrasonic cleaning is suitable for many different types of objects, including Metals, Glass, Plastics, Ceramics, etc. However, certain materials or objects may be more sensitive to ultrasonic vibration, so it is necessary to choose the appropriate cleaning parameters and cleaning solution carefully. For special materials or sensitive objects, it is recommended to test them before use to ensure that they withstand the ultrasonic cleaning process.
QHow to choose ultrasonic cleaner?
A When selecting the right Ultrasonic Cleaner, factors such as cleaning requirements, capacity size, Frequency Power, Control system functionality, mass Reliability, and cost-effectiveness need to be considered.
Standard
Filter Brand Store Contact