CHINA ASR-NZ-12 Vertical Low Temperature Folding Tester
This machine is used to test the cold resistance of finished shoes, rubber, plastic, soles, synthetic leather, etc. to understand the material or finished product adaptation to low temperature climate or cold areas. This machine is made of stainless steel. It can be equipped with various resistant fixtures to meet different requirements.
Model：
ASR-NZ-12
Similar products
AISRY ASR-NZ-12 Vertical low temperature folding TesterSPEC
AISRY ASR-NZ-12 Vertical low temperature folding TesterDetails
AISRY ASR-NZ-12 Vertical low temperature folding TesterPacking list
- SKU
- NB039041
- Inner & Outer Chamber Material
- Stainless steel #304
- Controller
- Omron temperature Controller
- Temperature range
- -30℃+150℃
- Optional inner box action
- Installed finished shoes are resistant to bending, outsole is resistant to twisting, and leather is flexible and fixture.
- Protection device
- Thermal protection shutdown, leakage protection shutdown over temperature protection, overload protection and other functions
- Control Accuracy
- ±0.3℃
- distribution uniformity
- ±0.1℃
- Cooling rate
- It takes about 45 minutes to reach -30 ℃ at room temperature
- Refrigerant
- R404 Environmental Refrigerant
- Compressor
- Original fully enclosed
- Compressor start delay
- 5min
- Power consumption
- (4-6)KW
- Thermal Insulation
- Hard Foam & Glass Cotton
- Counter
- LCD,0~999,999
- window
- (210 × 35 × 270) mm, two-grid vacuum layer
- Window light
- P1, 5W
- Power
- AC380V 50Hzor1 AC220V 50HZ
- motor
- Belt-less multi-imported gear reduction motor
- Inner box size
- 600 × 600 × 550mm is mainly based on the actual size
- Volume
- 110 × 105 × 160cm is mainly based on the actual size.
- Weight
- 420kg
ASR-NZ-12
Vertical low temperature folding Tester
This machine is used to test the cold resistance of finished shoes, rubber, plastic, soles, synthetic leather, etc. to understand the material or finished product adaptation to low temperature climate or cold areas. This machine is made of stainless steel. It can be equipped with various resistant fixtures to meet different requirements.
This machine is used to test the cold resistance of finished shoes, rubber, plastic, soles, synthetic leather, etc. to understand the adaptability of materials or finished products to low temperature climates or cold regions. This machine is made of stainless steel and can be equipped with various resistant fixtures to Different requirements apply.
According to the standard
ASTM-D1790, D1593, 1052, JIS-K6545, HB-T2877, CNS-7705, ISO 20344, GB/T20991-2007
FAQ
QIs the price listed on the website the final cost for overseas purchases?
ANo, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.
QWhat is the specific process for purchasing the product?
AFirst, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.
QWhat should I do if the instrument I purchase needs repair?
AAfter-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.