China

Yoke P610 Portable Dissolved Oxygen Meter

SE
Range 0~20.00mg/L, large screen LCD display, automatic temperature compensation, automatic salinity compensation and manual air pressure compensation functions, using combined diaphragm cap, polarographic electrode.
Model：
Certificate
Contact
Details SPEC VIDEO CAT OI
Similar products

Yoke P610 P6 series dissolved oxygen analyzerSPEC

Yoke P610 P6 series dissolved oxygen analyzerDetails

Yoke P610 P6 series dissolved oxygen analyzerPacking list

SKU
NB039405
Measuring range
0~20.00mg/L(ppm)；0~200.0%
resolution
0.1/0.01 mg/L(ppm)；1/0.1%
Measurement Accuracy
Electric meter ± 0.10 mg/L, matching; ± 0.40 mg/L
Response time
≤ 30s (25 ℃, 90% Response)
Residual current
≤0.1mg/L
Temperature compensation range
(0~99) ℃ (automatic)
Salinity compensation range
0~45ppt (manual)
Air pressure compensation range
0~200kPa (manual)
Auto calibration
Air saturated with water; water saturated with air
Electrode type
polarographic
data storage
150 groups
Save content
Numbers, measurements, Measurement Units and temperature values
Power
2 AA batteries (1.5V × 2)
Dimensions
65*120*31mm
Environment temperature
5~ 35 ℃ (0.01 grade)
Environment humidity
≤85%
Mass and safety certification
ISO9001:2000, CE和CMC
Protection class
IP57
Instrument Weight
180g
Suitcase size
255×210×50mm
Suitcase Weight
790g
P610
P6 series dissolved oxygen analyzer
Range 0~20.00mg/L, large screen LCD display, automatic temperature compensation, automatic salinity compensation and manual air pressure compensation functions, using combined diaphragm cap, polarographic electrode.
Yoke P610 Portable Dissolved Oxygen Meter Picture

Introduction

It is suitable for industries such as aquaculture, water source monitoring, sewage treatment and environmental monitoring, and is especially suitable for field and field use.

Features

1. Large-screen LCD display with controllable white backlight.

2. Humanized design: bracket design, convenient for customers to use. Anti-skid glove design, convenient for customers to operate.

3. The dissolved oxygen measurement mode has the functions of automatic temperature compensation, automatic salinity compensation and manual air pressure compensation.

4. The polarographic dissolved oxygen electrode with a new structure can measure temperature, salinity and dissolved oxygen at the same time. Equipped with a special dissolved oxygen electrode calibration sleeve, the electrode polarization only needs 3~5 minutes.

5. Built-in microprocessor chip, with intelligent functions such as automatic calibration, data storage, function setting, automatic shutdown and low Voltage display.

6. Using the combined diaphragm cap, when replacing the sensitive membrane, just screw the new diaphragm cap on the electrode, which is very convenient to use.

7. The instrument conforms to IP57 waterproof level and can be equipped with a suitcase.

FAQ
QHow to replace the diaphragm cap electrode?
A The steps to replace the diaphragm cap correctly are: 1. Unscrew the diaphragm cap; 2. Clean and dry the electrodes without the diaphragm cap with pure water; 3. Wipe the cathode surface with a clean flannel or paper towel.
QCan dissolved oxygen meters be tested in static water?
A No, it will affect the test results.
QHow long does it take to dissolve oxygen meter electrode polarization?
A 3~5min。
Knowledge
Standard