Yoke P614 Portable dissolved oxygen Conductivity Detector rate Measurement Instrument

P614

P6 Series Conductivity Detector/Dissolved Oxygen Meter

Dissolve oxygen + Conductivity Detector two-in-one, automatically identify 8 kinds of Conductivity Detector standard solutions, automatic temperature compensation, automatic salinity compensation and manual air pressure compensation, high-purity water nonlinear temperature compensation function,

Introduction

It is used to measure the conductivity, TDS, salinity and resistivity of aqueous solution. It is suitable for industrial and mining enterprises, water treatment engineering and environmental protection industries, especially for field and field use.

Features

1. Large-screen LCD display with controllable white backlight.

2. Built-in microprocessor chip, with intelligent functions such as automatic calibration, automatic temperature compensation, data storage, function setting, automatic shutdown and low Voltage display.

3. Automatically identify 8 kinds of conductivity standard solutions, and there are two series of standard solutions to choose from: European and American series and Chinese series.

4. The dissolved oxygen measurement mode has the functions of automatic temperature compensation, automatic salinity compensation and manual air pressure compensation.

5. The polarographic dissolved oxygen electrode with a new structure can measure temperature, salinity and dissolved oxygen at the same time. Equipped with a special dissolved oxygen electrode calibration set, the electrode polarization only needs 3~5 minutes.

6. Using the combined diaphragm cap, when replacing the sensitive membrane, just screw the new diaphragm cap on the electrode, which is very convenient to use.

7. Using excellent conductivity measurement technology, only one point of calibration is required, and electrodes with different cell constants are configured to meet the measurement accuracy requirements of 0.5μS/cm ~ 200 mS/cm.

8. Switchable conductivity, TDS, salinity and resistivity. TDS and salinity are calculated using polynomials to ensure the conversion accuracy of the full range.

9. Conductivity measurement mode has high-purity water non-linear temperature compensation function.

10. Humanized design: bracket design, convenient for customers to use. Anti-skid glove design, convenient for customers to operate.

11. The instrument is equipped with a temperature electrode for automatic temperature compensation.

12. The instrument complies with IP57 waterproof level, optional calibration solution and suitcase.

Packing list：complete-built unit X1, manual X1, certificate of conformity X1, warranty card X1

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.