RDS 175G #3/8 "Gap Mayer Rods Moulding 400.1μm
SEInterstitial wire-wound, Film thickness 400.1 μm, diameter 9.52 mm, suitable for high viscosity fluid scraping.
$172.00/piece
PromotionLoading...
Coupon
Model：
175G# 3/8"
Similar products
-
CHINA formed Applicator rod ASP 400μm film thickness Stainless steel Coating Applicator Metering rod length 250mm$ 117.00SE -
MODERNER SZQ-400 (GB Bird-type) Film Applicator pigment Film Applicator 400μm -
MODERNER SZQ-400 (ISO Bird-type) Film Applicator 400μm Lab Scraper -
MODERNER SZQ 400 GB paints Coating Applicator 400μm/160mm -
CHINA ASP bar Applicator rod 400μm film thickness Film Applicator$ 133.00SE
RDS 175G# 3/8" Applicator rod 3/8 "SPEC
RDS 175G# 3/8" Applicator rod 3/8 "Details
RDS 175G# 3/8" Applicator rod 3/8 "Packing list
- SKU
- NB039490
- Production process
- Interstitial wire-wound
- WFT
- 400.1µm
- Diameter
- 9.52mm
- Total length
- 400mm
- Application width
- 300mm
- material
- stainless steel
175G# 3/8"
Applicator rod 3/8 "
Interstitial wire-wound, Film thickness 400.1 μm, diameter 9.52 mm, suitable for high viscosity fluid scraping.
Preparation principle
Following the Mayer Rod film coating principle, for higher viscosity fluids, the gap film coating rod reduces clogging and eliminates scratches. By winding smaller wires at pitches (see photo), the cavity created is wide and shallow, allowing thick coatings to flow better. Smaller wires create smaller interruptions in the coating flow, allowing for more complete wetting of the coating.
FAQ
QI want to Spreader Coatings with higher viscosity, which Applicator rod is recommended?
A
Recommended RDS 175G Gap Applicator rod. It features a gap wire-wound design with a large wire spacing to reduce high viscosity Coating clogging, eliminate scratches, and allow thick coatings to flow more evenly.
QNeed 400μm wet film thickness, which one is suitable?
A
Choose RDS 175G 3/8 "this one is just right. Its wet film thickness is 400.1μm, stainless steel material is durable, 300mm application width can meet most of the experimental needs.
QHow does Mayer Rods work?
A
Spreader the coating evenly on the surface of the object through the specific shape of the coating rod, such as wire-wound or extrusion, to achieve control of the wet film thickness.
QWhat fields is Mayer Rods suitable for?
A
Mayer Rods is suitable for painting, gluing, sealing and other fields, especially for situations where precise control of Spreader volume is required.
QWhat is the difference between a gap Applicator rod and a wire-wound Applicator rod?
A
Applicator rods are mainly for high viscosity fluids. The standard wire-wound drawdown bar is suitable for wet-films below 1000cps, while the gap Applicator rod is suitable for fluids with high viscosity from 1000 to 3000cps
QCan this gap bar scrape high viscosity fluid samples?
A
Yes, unlike standard Myaer rods, gap rods are suitable for scraping fluids in the viscosity range of 1000 to 3000cps, but not beyond 3000cps. These numbers are not absolute, and Miscellaneous factors must also be considered.
QDoes this wire-wound gap open bar support customization?
A
Yes, the standard length is 40cm. If you need to customize Miscellaneous specifications, please contact customer service.
Knowledge