KairDa NDT530（F1） Coating Thickness Gauge brochure

Related products

KAIRDA HT5 (0~450 ℃) Ultrasonic Thickness Gauge High Temperature Probe
3.0~200mm30mmprobe

SE
KAIRDA F190 ° 90 ° Right Angle Probe Optional probe for NDT530 Coating Thickness Gauge
magnetic induction0 ~ 1250µm±3%

¥2450.0
SE
Hardness test of roll Shore Hardness Gauge KAIRDA NDT290S cast steel roll, forged steel roll, cast iron roll
30 ~ 110HS170 ~ 960HLD19 ~ 651HB13 ~ 100HRB17 ~ 68.5HRC59 ~ 85HRA80 ~ 976HVAny (360 °)Steel and cast steel, alloy tool steel, stainless steel, gray cast iron, ductile iron, cast aluminum alloy, copper zinc alloy (brass), copper tin alloy (bronze), pure copper, forged steel, cast steel rolls, forged steel rolls, cast iron rolls

SE
KAIRDA NDT680 digital Ultrasonic Flaw Detector nondestructive detection 500 sets of configuration channels
(0~15000)mm(0.2~20)MHz(100~20000)m/s

¥7780.0
SE
Portable Leeb Hardness Tester KAIRDA NDT230 Plastic Housing Richter Hardness Test Meter
170 ~ 960HLD19 ~ 651HB13 ~ 100HRB17 ~ 68.5HRC59 ~ 85HRA80 ~ 976HV30 ~ 110HSAny (360 °)Steel and cast steel, alloy tool steel, stainless steel, gray cast iron, ductile iron, cast aluminum alloy, copper zinc alloy (brass), copper tin alloy (bronze), pure copper, forged steel

SE
KAIRDA NDT530 (F1) Galvanized Thickness Gauge with magnetic Induction Probe
Magnetic Induction0~1250μm±2%

¥1380.0
SE
KAIRDA N05/90 Ultrasonic Thickness Gauge Probe
1.2~230.0mm5F10mm

SE
Roughness Gauge Probes (Sensors) KAIRDA KS131 Deep Groove Probe
Deep groove probeIt can measure grooves with a groove width of more than 3mm and a groove depth of less than 10mm; or the surface Roughness of steps with a height of less than 10mm, and can also measure planes and cylinders.

SE
Roughness Gauge Probes (Sensors) KAIRDA KS100 Standard Probes
Standard probeRoughness measurement of planar and cylindrical surfaces. When measuring the inner surface of the hole, the minimum aperture is 5mm and the maximum depth is 22mm

SE
KAIRDA N1 standard probe eddy Current NDT530 Coating Thickness Gauge optional probe
eddy current0 ~ 1250µm±3%

¥520.0
SE

Recommended for more brochure