Pushen 0-15um single-channe small Fineness gauge (single-channe) detects the Fineness of Coatings, inks and other particles
SE BoutiquePushen 0-15um single-channe small Fineness gauge scraper size is 120 × 25 × 13mm, measuring range is 0~15μm, slot width is 12mm.
$192.00/piece
PromotionLoading...
Coupon
Model：
0-15um
Similar products
-
TRUIT TR 1201/015 single-channe Coating Fineness gauge 0~15μm$ 165.00SE -
MODERNER QXD-15 single-channe Fineness gauge stainless steel material 0~15μm range -
TQC VF2104 single-channe grinding Fineness of Grinding Gauge 0~15μm with calibrated certificate$ 1044.00SE -
PUSHEN /Pushen QXD-15um single-channe fineness grindometer 0-15μm$ 285.00SE -
TQC VF2120 wide-channel Grindometer 0~15μm with calibrated certificate$ 1193.00SE
Pushen 0-15um Fineness gaugeSPEC
Pushen 0-15um Fineness gaugeDetails
Pushen 0-15um Fineness gaugePacking list
- SKU
- NB000397
- Scraper type
- single-channe
- Number of grooves
- 1
- range
- 0~15μm
- Scale unit
- μm
- Scraper material
- stainless steel
- Scraper size
- 120*25*13mm
- Graduation
- 1.5μm
- Groove width
- 12mm
0-15um
Fineness gauge
Introduction of single groove small Fineness of Grind Gauge
Pushen/Pushen single-slot small Fineness of Grind Gauge includes two models PU-2400 and PU-2401. PU-2402 is a double-slot Fineness of Grind Gauge , which is developed and designed according to the parameters specified in the relevant standards of the Fineness Meter. Yes, there are three units of measurement: microns, Hegmans, and mils.Pushen PU-2400/2401/2402 single groove small Fineness of Grind Gauge has three measuring ranges: 0~15μm, 0~25μm, 0~15μm respectively, and the corresponding groove width is 12mm.
Pushen single-slot small Fineness of Grind Gauge is made of stainless steel. It is a single-slot Fineness of Grind Gauge, which is used to detect the fineness of particles such as paint and ink.
Pictures
FAQ
QCan all small Fineness gauges be tested in the JB/T9385 standard?
A
Not necessarily, but this 0-15um Fineness gauge can be considered.
QFineness of electric conductive ink particles, is it measured with this scraper Fineness meter? How to measure?
A
Fineness of electric conductive ink can be measured with scraper Fineness meter. For specific measurement methods, please refer to the operation manual or video of NBchao. Com Mall Knowledge Base or any Fineness meter details page.
QCarbon nanotube slurry with which type of Fineness gauge? Fineness about 5 to 10 error.
A
It is recommended to use a Fineness gauge with a range of 0 to 15 μm, one path 2 paths is OK. If this range is expected to expand, choose a Fineness gauge with a range of 0 to 25 μm appropriately.
Standard
- 1SJ/T 10454-2020《Dielelectric paste for multilayer lay out of thick film hybrid integrated circuits》
- 2GB/T 21894-2008《A kind of photosensitive emulsion for plate making on fabric rotary screen printing》
- 3HG/T 5776-2020《Water-based coatings for surface of rubber sealing products》
- 4HG/T 5175-2017《Water-based decorative coating for glass and ceramic products》
- 5ASTM D3794-2022《Standard Guide for Testing Coil Coatings》
- 6QB/T 5477-2020《Water-based printing ink for decorating paper》
- 7ASTM D1210-05-2022《Standard Test Method for Fineness of Dispersion of Pigment-Vehicle Systems by Hegman-Type Gage》
- 8JB/T 9385-2017《Scraper fineness gauges》
- 9ASTM D1316-2020《Standard Test Method for Fineness of Grind of Printing Inks By the NPIRI Grindometer》
- 10JJG 905-2010《Fineness of Grind Gage》