YIHENG DKZ-2B thermostatic oscillating Water Tank, input power 1250W heating drying test

DKZ-2B

Thermostatic sink

Temperature range 5~ 99 ℃, Temperature fluctuation +/- 1 ℃, temperature resolution 0.1 ℃, temperature control mode microcomputer control, circulation mode internal/external circulation, Total power 1250W, dimensions 643 * 350 * 353mm, working slot size 438 * 310 * 250mm, speed range 30~150rpm

Introduction of DKZ-2B constant temperature oscillating Water Tank

The shell and liner of Yiheng DKZ-2B constant temperature oscillating Water Tank are made of stainless steel, which has good corrosion resistance and is easy to clean. The input power of the DKZ-2B constant temperature oscillating Water Tank is 1250W, and the temperature resolution is 0.1°C. DKZ-2B is suitable for laboratory research with reliable operating temperature.

Features and advantages

1. Stainless steel liner and top cover are used, which are anti-corrosion and easy to clean.

2. Microcomputer PID temperature controller, accurate and reliable temperature control, with timing.

3. Over-temperature sound and light tracking alarm, so that the samples are reliably protected and no accidents occur.

4. The AC deceleration motor with stepless speed regulation can directly drive the shaking table with high linearity and low noise.

5. DKZ- 2B constant temperature oscillating Water Tank can be used for heating and drying experiments.

Multi-segment programmable controller (optional)

● It can preset 15 sections and 30 steps of programming, and the setting time of each section is 1~99 hours and 59 minutes.

● Microcomputer program controller, time and heating rate, can carry out constant temperature test at a very fast speed.

● Multi-segment programmable control can simplify the complex test process and truly realize automatic control and operation.

Pictures

Packing list：host x1, instruction manual x1, packing list x1, warranty x1, warranty card x1, fuse x1, shelf x1.

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.