YIHENG DKZ-3 laboratory thermostatic oscillation tank with input power of 1650W

DKZ-3

Thermostatic sink

Temperature range 5~ 99 ℃, Temperature fluctuation +/- 1 ℃, temperature resolution 0.1 ℃, temperature control mode microcomputer control, circulation mode internal/external circulation, Total power 1650W, dimensions 823 * 350 * 355mm, working slot size 618 * 310 * 250mm, speed range 30~150rpm

Introduction of DKZ-3 laboratory constant temperature oscillating Water Tank

Yiheng DKZ-3 laboratory constant temperature oscillating Water Tank is made of stainless steel liner, which has good corrosion resistance. The DKZ-3 laboratory constant temperature oscillating Water Tank adopts an AC geared motor with stepless speed regulation, which can directly drive the shaking table and has the advantage of low noise. The input power of the DKZ-3 laboratory constant temperature oscillating Water Tank is 1650W, and the temperature resolution is 0.1°C.

Features and advantages

1. Stainless steel liner and top cover are used, which are anti-corrosion and easy to clean.

2. Microcomputer PID temperature controller, accurate and reliable temperature control, with timing.

3. Over-temperature sound and light tracking alarm, so that the samples are reliably protected and no accidents occur.

4. The AC deceleration motor with stepless speed regulation can directly drive the shaking table with high linearity and low noise.

5.DKZ-3 laboratory constant temperature oscillating Water Tank can be used for heating and drying experiments.

Multi-segment programmable controller (optional)

● It can preset 15 sections and 30 steps of programming, and the setting time of each section is 1~99 hours and 59 minutes.

● Microcomputer program controller, time and heating rate, can carry out constant temperature test at a very fast speed.

● Multi-segment programmable control can simplify the complex test process and truly realize automatic control and operation.

Pictures

Packing list：host x1, instruction manual x1, packing list x1, warranty x1, warranty card x1, fuse x1, shelf x1.

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.