Specifications
| Temperature range | -60~150℃ |
| Temperature fluctuation | ≤±0.5℃ |
| Temperature Uniformity | ≤±2℃ |
| Humidity control range | 20~98%R.H |
| Humidity Deviation | ≤ ± 2%~ 3% R. H (above 75% R. H); ± 5% R. H (below 75% R. H) |
| Interior size | 800*600*850mm |
| Dimensions | 1380*1850*1250mm |
| Interior Volume | 408L |
| Cooling rate | 0.7~1℃/min |
| Heating rate | 2~3℃/min |
| Noise | ≤65dB |
| wind speed | 1.7~2.5m/s |
| Humidity Deviation | ≤3% |
| Heating rate | RT + → 150 ℃ │ 40min (no-load nonlinear) |
| Cooling rate | RT +~ -60 ℃ │ 65min (no-load nonlinear) |
| Humidity fluctuation | ±3%R.H |
| Humidity Deviation | ≤3% |
| Inner box material | SUS304 stainless steel |
| Enclosure Material | Stainless steel plate atomized (SUS #304) or cold plate paint (optional) |
| Thermal insulation material | Rigid Polyurethane Foam and Glass Cotton |
| Box door window | 260X340x40mm 3-layer vacuum layer |
| Box door | Single door, single window, left open, handle on the right |
| Circulatory system | (1) 90W motor 1 (2) Stainless steel extended shaft (3) Multi-wing fan blade (SIRCCO FAN) |
| Refrigeration system | Fully dense compressor imported from France |
| refrigerant | Environmentally friendly refrigerant R404A |
| Condenser | Fin type with cooling motor |
| Condenser | Fin type multi-stage automatic load Capacity adjustment |
| expansion system | Capacity Controlled Refrigeration System |
| Humidity Control Accuracy | ±1%R.H |
| Controller Resolution | Temperature ± 0.1, Humidity 1% R.H. |
| Temperature slope | 0.1~ 9.9 can be set |
| Temperature and humidity conversion output | 4～20MA |
| Temperature and humidity input signal selection | PT 100Ω × 2 (dry and wet bulbs) |
| Available program groups | Up to 100 groups |
| Available memory Capacity | Total 5000SEGMENTS |
| Command, repeability | Each command can be up to 9999 times |
| Environment temperature | 0~35℃ |
| Environment temperature | 5~35℃ |
| Environment humidity | Not more than 85% |
| atmospheric pressure | 86106Kpa |
| Natural drain | There must be no protrusions in the middle of the drain pipe, and there must be no extreme inclination of the floor of the house |
| Power | Single-phase electricity 6.5KW 380V 50HZ |
| temperature control Accuracy | ±0.1℃ |
Packing list
complete-built unit X1, manual X1, certificate of conformity X1, warranty card X1
After-sales instructions
Warranty days: 365 days
1. For product quality problems caused by non-human products of instruments and equipment, the manufacturer will provide free warranty services during the warranty period;
2. There is no warranty period for fragile and consumable parts, and if you find product quality problems after receiving the goods, please apply for return and exchange within 7 days, and you will not wait for the overdue ones;
[Note] For after-sales services outside the Chinese mainland, if the instrument requires repair, the shipping and possible associated taxes shall be borne by the sender. Generation address of the manual: http://en.nbchao.com/p/39866/Specification.html , which is only used by users who purchase commodities from the NBCHAO.