KOSON KS-6000C Intelligent Bond strength Tester integrated
SE
KS-6000C
KOSON KS-6000C Bond strength TesterSPEC
KOSON KS-6000C Bond strength TesterDetails
KOSON KS-6000C Bond strength TesterPacking list
- SKU
- NB040600
- Range
- 0~6.000KN/3.75Mpa
- Hollow cylinder stroke
- 10mm
- Data storage
- 50 articles
- LCD lighting function
- Yes.
- Device size
- 148*104*209mm
- Force unit
- Mpa/kN
- Instrument structure
- All-in-one
- Data query and deletion
- Yes.
- Configurator Display mode
- number
- Packaging Dimensions
- 450*185*385mm
- resolution
- 0.001KN
- Host Weight
- 2.7kg
- peak hold function
- Yes.
- Battery
- High Capacity lithium battery
- Total Mass
- 7.2kg
Instrument Introduction
KS-6000C Intelligent Bonding Strength Tester adopts a portable hydraulic jack. The pressure device and the hollow jack adopt an integrated structure design, which is easy to carry and test. The main body of the instrument is ultra-light. The main body weighs only 2.0kg. Modern design, no need to connect the instrument, start the measurement directly, the instrument display unit has two ways KN and MPA can be converted, which is convenient for customers to use and makes the on-site detection more convenient and fast.
Application
KS-6000C intelligent bond strength Tester is an intelligent high-precision bond (tensile) strength Tester developed by our company according to relevant national standards and market demand. It is suitable for decorative tiles, mosaics, and various plates. , Paints, coatings, coatings, external wall insulation materials (EPS board, SPS board) bonding strength and various external wall building materials, adhesive bonding strength testing.
Standards
JGJ110-2008 "Inspection Standard for Bonding Strength of Decorative Bricks in Construction Engineering"
JGJ126-2000 "External Wall Facing Brick Engineering Construction and Acceptance Regulations"
JGJ144-2004 "Technical Regulations for External Thermal Insulation Engineering of Exterior Walls"
JG158-2004 "Rubber powder polystyrene particle external wall insulation system"
JG149-2003 "Expanded Polystyrene Board Thin Plastering External Wall External Thermal Insulation System"
- 1Bond strength Tester type, application and selection full analysis
- 2Experimental case of intelligent bond strength Detector [video]
- 3Introduction to Common Bond Strength Calculation Formulas and Representation Methods
- 4Influence Factors and Test Methods of Bond Strength
- 1JC/T 984-2011《Polymer modified cement mortar for waterproof》
- 2JC/T 2570-2020《Color sand flooring materials》
- 3JG/T 512-2017《General technical requirements for building exterior wall coating system》
- 4 110-2017《Testing standard for adhesive strength of tapestry brick of construction engineering》
- 5QB/T 2568-2002《Solvent cements for unplasticized poly (vinyl chloride)(PVC-U) plastic piping system》
- 6JG/T 298-2010《Putty for interior》
- 7JG/T 507-2016《Digital sticking Strength Tester》
- 8JC/T 2090-2011《Polymer modified cement slurry for waterproof》
- 9JC/T 2217-2014《Epoxy resin waterproof coating》
- 10GB/T 30803-2014《Thermal insulation products for building applications—Determination of the tensile bond strength of the adhesive and of the base coat to the thermal insulation material》