KESIONOTS Appliance High and Low Temperature Impact Tester KS-OTS-LR50LC Low Temperature -65 ℃/50L
SELow temperature zone -10 ℃~ -65 ℃, divided into high temperature zone, low temperature zone, test zone three boxes, volume 50L, 304 stainless steel inner box material, suitable for testing material structure or composite.
$12288.00/set
PromotionLoading...
Coupon
Model：
KS-OTS-LR50LC
kesionots KS-OTS-LR50LC Thermal Shock Test ChamberSPEC
kesionots KS-OTS-LR50LC Thermal Shock Test ChamberDetails
kesionots KS-OTS-LR50LC Thermal Shock Test ChamberPacking list
- SKU
- NB041549
- Temperature range
- High temperature zone: 60 ℃~ 150 ℃; low temperature zone: -10 ℃~ -65 ℃
- Heating rate
- RT-200 ℃ takes about 35min
- Cooling rate
- RT-70°C≈85min
- Liner size
- 360*400*350mm
- Dimensions
- 1380*1800*1550mm
- Temperature recovery time
- Within ≤ 5min
- Temperature transition time
- ≤ 10s
- Temperature control Accuracy
- ±0.5℃
- Temperature Uniformity
- ±2.0℃
- Liner material
- stainless steel
- Enclosure Material
- The whole machine is SUS304 #stainless steel plate matte surface treatment or cold-drawn steel plate nanotechnology advanced baking paint
- Thermal insulation material
- High temperature resistant high density formic acid vinegar foam insulator material
- system
- P.I.D + S.S.R + microcomputer equilibrate temperature Control system
- Chill down the system
- Semi-hermetic double-stage compressor (water-cooled)/fully hermetic double-stage compressor (air-cooled)
- protection device
- Fuseless switch, compressor high and low Voltage protection switch, refrigerant high Voltage protection switch, fault warning system, electronic alarm
- Accessories
- viewing window (special optional type), two Upper/Lower adjustable partitions, power-on measuring holes, casters, horizontal brackets
- Power
- AC 380V 50HZ/60HZ
- Weight
- 700kg
- Controller
- South Korea "TEMI" South Korea "TEMI" or Japan "OYO" card
- Refrigeration system
- French "Taikang" brand or German BITZER
- Inner Volume
- 50L
KS-OTS-LR50LC
Thermal Shock Test Chamber
Low temperature zone -10 ℃~ -65 ℃, divided into high temperature zone, low temperature zone, test zone three boxes, volume 50L, 304 stainless steel inner box material, suitable for testing material structure or composite.
Introduction
Thermal shock testing machine, used to test the material structure or composite material, in an instant through the extreme high temperature and extremely low temperature continuous environment, so as to test the chemical changes caused by thermal expansion and contraction in the shortest time or physical damage. Applicable objects include metal, plastic, rubber, electronics... and other materials, which can be used as the basis or reference for product improvement.
Three-Chamber equipment structure
◆High-temperature zone, low-temperature zone, and test zone. The test product is placed in the test zone. During impact, the temperature of the high-temperature zone or low-temperature zone rushes into the test zone for impact. The test product is static.
*Adopt the touch-control graphical operation interface, which is easy to operate.
*The impact method uses the wind circuit switching method to introduce the temperature into the test area, and do the cold and heat impact test.
FAQ
QOur company mainly does Reliability testing of electronic products, which needs to simulate the tolerance of products under extreme temperature changes. Do you have a suitable Thermal Shock Test Chamber to recommend?
A
KESIONOTS KS-OTS-LR50LC Thermal Shock Test Chamber This device adopts a three-box structure, with a maximum of 150 ° C in the high temperature zone and a minimum of -65 ° C in the low temperature zone. The temperature conversion time is fast, and the Impact can be completed within 10 seconds. It is very suitable for testing the performance changes and potential damage of electronic products in a rapidly changing temperature environment.
QOur laboratory space is limited, but we need to conduct Thermal Shock testing on rubber seals to verify their aging under high and low temperatures. Is there a suitable model?
A
For rubber material testing and space constraints, the KESIONOTS KS-OTS-LR50LC is a good fit. Its liner size is 360 * 400 * 350mm (50L volume), and the structure is compact. During the test, the sample is stationary in the test area, and it is quickly introduced into the high and low temperature through the air duct for Impact, which can effectively evaluate the physical changes caused by thermal expansion and contraction of rubber parts and meet the relevant aging test standards.
Knowledge
- 1What parts of Thermal Shock Test Chamber need to be cleaned frequently?
- 2How to distinguish between low/high Temperature Test Chamber and heat & cold shock chamber
- 3Thermal Shock Test Chamber FAQ and calibration method
- 4What are the similarities between the two-box thermal shock Test Chamber and the Three-Chamber thermal shock Test Chamber?
- 5What is the difference between the two-box thermal shock Test Chamber and the Three-Chamber thermal shock Test Chamber?
- 6What is the difference between the two-box thermal shock Test Chamber and the Three-Chamber thermal shock Test Chamber?
- 7What are the precautions for using a thermal shock Test Chamber?
- 8Introduction of operating conditions and safety protection devices of thermal shock Test Chamber
- 9What is the difference between a thermal shock Test Chamber and a high-low temperature shock Test Chamber?
- 10Which materials are not suitable for hot and cold shock Test Chamber testing?
Standard
- 1GB/T 46603-2025《Vitreous and porcelain enamels—Determination of crack formation temperature in the thermal shock testing of enamels》
- 2SL/T 807-2021《Guidelines for applications of epoxy resin grouts in hydraulic structures》
- 3GB/T 7991.3-2021《Test method of viterous and porcelain enamels—Part 3：Determination of resistance to thermal shock》