KESIONOTS High and Low Temperature Environmental Test Chamber KS-OTS-HD225LB Temperature Control -60 ℃~ 150 ℃
SE
KS-OTS-HD225LB
kesionots KS-OTS-HD225LB low/high temperature test ChamberSPEC
kesionots KS-OTS-HD225LB low/high temperature test ChamberDetails
kesionots KS-OTS-HD225LB low/high temperature test ChamberPacking list
- SKU
- NB041577
- Temperature range
- -60~150℃
- Interior Volume
- 225L
- Interior size
- 500*750*600mm
- Dimensions
- 1080*1670*1100mm
- Temperature Resolution Accuracy
- ±0.1℃
- Temperature Uniformity
- ±1.0℃
- Temperature control Accuracy
- ±1.0℃
- Temperature fluctuation
- ±0.5℃
- Heating rate
- ≈4.0℃/min
- Cooling rate
- ≈1.0℃/min
- Inner box material
- stainless steel
- Enclosure Material
- Advanced cold plate nano paint
- Thermal insulation material
- High temperature resistant high density formic acid vinegar foam insulator material
- Chill down the system
- Air and water cooled/double stage compressor
- Thermal insulation material
- High temperature resistant high density formic acid vinegar foam insulator material
- protection device
- Fuseless switch, compressor overload protection switch, refrigerant high and low Voltage protection switch, ultra-humidity over-temperature protection switch, fuse, fault warning system
- Accessories
- Viewing window, 50mm test hole, PL box light, Shelf, wet and dry ball gauze
- Controller system
- Choose from Korean or Japanese "OYO" cards
- Refrigeration system
- French "Taikang" brand or German "Bitzer"
- Power
- 1 220VAC±10%50/60Hz & 3 380VAC±10%50/60Hz
Introduction
The high-low Temperature Test Chamber, also known as the environmental Test Chamber, is suitable for high temperature and low temperature reliability tests of industrial products. For components and materials of related products such as electronics, automobiles and motorcycles, aerospace, ship weapons, colleges and universities, scientific research units, etc., under the condition of high temperature and low temperature (alternating) cyclical changes, test their various performance indicators to carry out product testing. Design, improvement, identification and inspection and other links, such as: aging test.
◆Aging: This machine promotes the deterioration of vulcanized rubber to calculate the change rate of tensile force and elongation before and after heating. It is generally believed that one day of testing at 70°C is equivalent to six months of exposure to the atmosphere in theory.
◆The product has a wide range of temperature control, and its performance indicators have reached the technical conditions of the national standard GB10592-89 high-low Temperature Test Chamber. It is suitable for environmental testing of electrical and electronic products according to GB2423. Test B: High temperature test method "Carry out low temperature, high temperature test and constant temperature test on the product. The products comply with GB2423.1, GB2423.2, GJB150.3, GJB150.4, IEC, MIL standards.
- 1How to deal with the unstable heating and humidity of the low/high Temperature Test Chamber?
- 2Low/high Temperature Test Chamber LED packaging adhesive resistance to high-low temperature test scheme
- 3Low/high Temperature Test Chamber applied to high-low temperature resistance test of hot boiler
- 4Low/high Temperature Test Chamber for high-low temperature resistance test of fluoroether rubber sealing materials
- 5Application of low/high Temperature Test Chamber in high-low temperature resistance test of space launch vehicle components
- 6Low/high Temperature Test Chamber for high-low temperature resistance test of lignin fiber
- 7Low/high Temperature Test Chamber for high-low temperature resistance performance test
- 8Application of low/high Temperature Test Chamber in high-low temperature resistance test of optoelectronic components
- 9Application of low/high Temperature Test Chamber in high-low temperature resistance test of polymer materials
- 10Low/high Temperature Test Chamber in capacitive screen high-low temperature resistance test
- 1GB/T 2424.7-2024《Environmental testing—Part 3: Supporting documentation and guidance—Measurements in temperature chambers for tests A (Cold) and B (Dry heat) (with load)》
- 2JB/T 4278.8-2011《Verification procedure for test equipment of rubber plastic wire and cable.Part 8: Low temperature test oven》
- 3GB/T 713.1-2023《Steel plate,sheet and strip for pressure equipments—Part 1:General requirements》
- 4GB/T 9979-2005《Guide rule of test for mechanical properties of fiber-reinforced plastics at elevated and reduced temperatures》
- 5GB/T 39933-2021《Rotational moulding—Test method for low temperature impact》
- 6GB/T 10590-2006《Specifications for high and low temperature/low air pressure testing chambers》
- 7GB/T 33861-2017《Testing method of energy efficiency for temperature Test Chambers》
- 8GB/T 10592-2023《Specifications for high/low temperature testing chambers》
- 9GB/T 2423.63-2019《Environmental testing—Part 2:Test methods—Test: combined temperature(cold and heat)/low air pressure/vibration（mixed mode）》
- 10GB/T 32710.11-2016《Safety requirements for environmental testing and conditioning equipment—Part 11: Heat aging Test Chambers》