China

KESIONOTS experiment high and low temperature test box KS-OTS-HD80LC temperature control -40 ℃~ 150 ℃

SE
Temperature control -40 ℃~ 150 ℃, volume 80L, the outer box is high-grade cold plate nano-paint, the inner box is stainless steel, air-water cooled double-stage compressor refrigeration, used for high temperature and low temperature cycle change test.
$4532.00/set
PromotionLoading...
Coupon
Certificate
Contact
Details SPEC Con OI
Similar products

kesionots KS-OTS-HD80LC low/high temperature test chamberSPEC

kesionots KS-OTS-HD80LC low/high temperature test chamberDetails

kesionots KS-OTS-HD80LC low/high temperature test chamberPacking list

SKU
NB041584
Temperature range
-40℃~150℃
Interior Volume
80L
Working size
400x500x400mm
Outer box size
880x1370x1000mm
Temperature analysis Accuracy
±0.1℃
Temperature Uniformity
±1.0℃
Temperature control Accuracy
±1.0℃
Temperature fluctuation
±0.5℃
heating time
About 4.0 ℃/min
Cooling time
About 1.0 ℃/min
Inner box material
stainless steel
Enclosure Material
Advanced cold plate nano paint
Thermal insulation material
High temperature resistant high density ethyl chloroformate foam insulator material
Chill down the system
Air and water cooled/dual stage compressor
Thermal insulation material
High temperature resistant high density ethyl chloroformate foam insulator material
Protection device
Fuseless switch, compressor overload protection switch, refrigerant high and low Voltage protection switch, ultra-humidity over-temperature protection switch, fuse, fault warning system
Accessories
Viewing window, 50mm test hole, PL box light, baffle, wet and dry ball gauze
Controller
Choose from Korean or Japanese "OYO" cards
compressor
French "Taikang" brand or German "Bitzer"
Power
1 220VAC±10%50/60Hz & 3 380VAC±10%50/60Hz
KS-OTS-HD80LC
low/high temperature test chamber
Temperature control -40 ℃~ 150 ℃, volume 80L, the outer box is high-grade cold plate nano-paint, the inner box is stainless steel, air-water cooled double-stage compressor refrigeration, used for high temperature and low temperature cycle change test.
KESIONOTS experiment high and low temperature test box KS-OTS-HD80LC temperature control -40 ℃~ 150 ℃ Picture

Introduction

The high-low Temperature Test Chamber, also known as the environmental Test Chamber, is suitable for high temperature and low temperature reliability tests of industrial products. For components and materials of related products such as electronics, automobiles and motorcycles, aerospace, ship weapons, colleges and universities, scientific research units, etc., under the condition of high temperature and low temperature (alternating) cyclical changes, test their various performance indicators to carry out product testing. Design, improvement, identification and inspection and other links, such as: aging test.

◆Aging: This machine promotes the deterioration of vulcanized rubber to calculate the change rate of tensile force and elongation before and after heating. It is generally believed that one day of testing at 70°C is equivalent to six months of exposure to the atmosphere in theory.

◆The product has a wide range of temperature control, and its performance indicators have reached the technical conditions of the national standard GB10592-89 high-low Temperature Test Chamber. It is suitable for environmental testing of electrical and electronic products according to GB2423. Test B: High temperature test method "Carry out low temperature, high temperature test and constant temperature test on the product. The products comply with GB2423.1, GB2423.2, GJB150.3, GJB150.4, IEC, MIL standards.


FAQ
QOur company is doing Rubber aging test, looking for a low/high temperature test chamber, what do you recommend?
A KS-OTS-HD80LC low/high temperature test chamber Temperature range -40~ 150 ℃, especially suitable for rubber aging test, such as testing at 70 ℃ for one day, theoretically equivalent to exposure to the atmosphere for 6 months, can effectively accelerate rubber deterioration, inspection of its tensile strength and other performance changes. It meets relevant national standards, stable and reliable performance.
QWe need high and low temperature cycle testing of automotive electronic parts, which test chamber is suitable?
A KS-OTS-HD80LC low/high temperature test chamber is suitable for high and low temperature Reliability test in automotive, electronics and other fields. Temperature Uniformity +/- 1.0 ℃, high control accuracy, can simulate harsh environment, inspection parts under temperature cycle performance. Studio 80L volume, suitable for small and medium-sized parts testing, and in line with GB2423 and other standards to ensure test accuracy.
Knowledge
Standard
Filter Brand Store Contact