China

LICHEN LC-LGA-3 Cold Dry Air Generator

As the air source of Gas Chromatograph, the cold dry cyclone cools down, the output Flow rate is 0~3L/min, and the 8L mg aluminum alloy gas storage tank can replace the traditional high Voltage air cylinder.
Model:

LICHEN LC-LGA-3 Cold dry air generatorSPEC

LICHEN LC-LGA-3 Cold dry air generatorDetails

LICHEN LC-LGA-3 Cold dry air generatorPacking list

SKU
NB041786
Power
220V 50Hz
Power
150W
Display mode
LCD
output pressure
0~0.4Mpa
Output pressure stability
≤ 0.003Mpa
Flow rate
0~3L/min
Operating Environment
Temperature 10 ℃~ 40 ℃, Humidity ≤ 85%
tracheal Connector specifications
M8 × 1 nut, outer diameter 3mm air line pipe
Net Weight
30kg
Product size
455×260×380mm
LC-LGA-3
Cold dry air generator
As the air source of Gas Chromatograph, the cold dry cyclone cools down, the output Flow rate is 0~3L/min, and the 8L mg aluminum alloy gas storage tank can replace the traditional high Voltage air cylinder.
LICHEN LC-LGA-3 Cold Dry Air Generator Picture

Introduction

As the air source for gas chromatographs, cold-dry air generators can replace high-pressure cylinders in the laboratory, making your analysis work more convenient and safer. This instrument has a secondary over-Voltage protection device and an over-temperature automatic control device. When the gas pressure exceeds the set value or the compressor casing temperature rises to 80℃, the automatic control system will automatically turn off the power to protect the instrument, which is safe and reliable. In addition The instrument is equipped with a normal pressure starting device, which extends the life of the compressor; the gas purification system of this instrument uses a cold-drying system and activated carbon to ensure the purity of the output gas; the gas line system uses two-stage Voltage stabilization to improve the stability of the gas source .


Lichen LC-LGA-3 cold dry air generator details picture 1

Features

▪ The 7-inch color screen displays the cold-drying temperature, output pressure, tank pressure, cold-drying status, and compressor status, enabling online monitoring

▪ The output pressure and the pressure inside the tank adopt precision pressure sensors and are digitally displayed on the screen, eliminating the need for traditional pointer pressure gauges.

▪ Cold-dry cyclone cooling, low gas temperature, daily maintenance-free

▪ The output gas temperature is low, better than -70℃ dew point, and the output gas has low moisture content

▪ It has the memory function of the current startup time and accumulated working time, which facilitates humanized management of the laboratory.

▪ The instrument has three-level automatic protection of overpressure, overcurrent and overheating.

▪ Double-stage Voltage stabilization, externally adjustable output pressure, easy to operate

▪ Easy to operate, just turn on the power switch to produce gas, the output pressure is stable, and it can provide gas source for both gas phase and nitrogen generators at the same time

▪ The 8L magnesium-aluminum alloy gas storage tank is used, which is resistant to high pressure and has a large gas storage capacity. The instrument starts and stops less often, which greatly extends the service life of the compressor.

▪ The instrument is equipped with an automatic drainage valve, which can set the cycle drainage time arbitrarily and fully automatic drainage without manual operation.

▪ The gas purification system uses activated carbon and cold drying system to remove impurities and moisture in the air without the need for additional purification pipes

▪ Can replace traditional high-pressure air cylinders and enable laboratory instrumentation

FAQ
QIs the price listed on the website the final cost for overseas purchases?
ANo, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.
QWhat is the specific process for purchasing the product?
AFirst, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.
QWhat should I do if the instrument I purchase needs repair?
AAfter-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.