KairDa NDT230+ Color screen Hardness Gauge brochure

Related products

KAIRDA NDT360 Ultrasonic Thickness Gauge 0.15~ 300mm
0.15~ 300 mm (45 #steel)0.03mm ∈ 0.3% * H0.001mm

¥11050.0
SE
KAIRDA NDT680 digital ultrasonic flaw detection (UFD) instrument nondestructive detection 500 sets of configuration channels
(0~15000)mm(0.2~20)MHz(100~20000)m/s

¥9000.0
SE
Roughness Gauge Probes (Sensors) KAIRDA KS120 Small Hole Probe
Small hole probeRoughness of the inner surface of the hole with an aperture greater than 2mm can be measured, the maximum depth is 9mm, and the plane and cylinder can also be measured

SE
Roughness Gauge Probes (Sensors) KAIRDA KS110 Curved Probe
curved probeCylindrical curved surfaces with a measurement radius greater than 3mm

SE
KAIRDA NDT271 Ultrasonic hardness gauge display
Perpendicular to the surface of the workpiece under testVickers (HV), Brinell (HB), Rockwell B (HRB), Rockwell C (HRC), Rockwell A (HRA)HV:10～1999/ HB:76～618/ HRB:41～105/ HRC:20.3～68/HRA:60.7～85.6

¥12800.0
SE
Roughness Gauge Probes (Sensors) KAIRDA KS131 Deep Groove Probe
Deep groove probeIt can measure grooves with a groove width of more than 3mm and a groove depth of less than 10mm; or the surface Roughness of steps with a height of less than 10mm, and can also measure planes and cylinders.

SE
Leeb Hardness Tester KAIRDA NDT290 Portable Richter Hardness Tester with printer
170 ~ 960HLD19 ~ 651HB13.5 ~ 101.7HRB17.9 ~ 69.5HRC59.1 ~ 88HRA80 ~ 1042HV30.6 ~ 102.6HSAny (360 °)Steel and cast steel, alloy tool steel, stainless steel, gray cast iron, ductile iron, cast aluminum alloy, copper zinc alloy (brass), copper tin alloy (bronze), pure copper, forged steel

SE
KAIRDA NDT320 Ultrasonic Thickness Gauge thickness measurement for hulls, pipes, high Voltage vessels, boilers, plastics, etc
0.75~ 300mm (probe determined)5MHzSplit probe

SE
Hardness test of roll Shore Hardness Gauge KAIRDA NDT290S cast steel roll, forged steel roll, cast iron roll
30 ~ 110HS170 ~ 960HLD19 ~ 651HB13 ~ 100HRB17 ~ 68.5HRC59 ~ 85HRA80 ~ 976HVAny (360 °)Steel and cast steel, alloy tool steel, stainless steel, gray cast iron, ductile iron, cast aluminum alloy, copper zinc alloy (brass), copper tin alloy (bronze), pure copper, forged steel, cast steel rolls, forged steel rolls, cast iron rolls

SE
KAIRDA NDT160 Roughness Gauge split surface roughness Tester
digital displayRa,Rz,Rq,Rt，Rp,Rv,R3z,R3y,Rz(JIS),Rs,Rsk,Rsm,Rku,Rmr; Ry(JIS);Rmax，RPc，Rk，Rpk，Rvk，Mr1，Mr2Z-axis (vertical): ± 80μm/± 160µm (enhanced); X-axis (horizontal): 20mm

SE

Recommended for more brochure