PINGXUAN KCh-1006A Viscometer Thermostatic Bath

KCh-1006A

Viscometer Thermostatic Bath

Microcomputer precision thermostatic Control system, Temperature Fluctuation +/- 0.03 ℃, temperature control room temperature + 8~ 100 ℃, volume 6L, the inner tank is made of stainless steel 304.

Introduction

1. Design a microcomputer precision constant temperature control system, using single-chip microprocessor control, self-tuning PID adjustment, and imported Pt100 temperature sensor technology.

2. The well-designed and thorough heating system has fast heating speed and good effect.

3. The thermostatic tank adopts an excellent overall foaming process and has good thermal insulation performance, effectively reducing cooling loss.

   The professional circulating stirring design ensures good horizontal and vertical uniformity of the liquid in the tank. Temperature fluctuation ±0.03°C, display resolution 0.01°C.
   

4. The inner tank is made of all stainless steel 304, and the box body is made of good anti-static spray plastic.

5. To control the temperature at any point between room temperature and 100°C, you can configure the NDJ-79 viscometer produced by our factory. The water outlet pipe of the thermostatic bath is connected to the water inlet pipe of the viscometer. The water inlet pipe of the thermostatic bath is connected to the viscometer NDJ-79. The water outlet pipes are connected to form a set of closed loops to ensure the temperature of the liquid being measured.

6. It is widely used in bioengineering, food, chemical industry, metallurgy, petroleum and other fields. It provides users with a high-precision, controlled, constant temperature place with uniform temperature. It is a professional super constant temperature Water Tank for research institutes, universities, factory laboratories, quality inspection departments, etc.

7. Experiments have shown that when the temperature deviation is 0.5°C, the viscosity value of some liquids deviates by more than 5%. The temperature deviation has a great influence on the viscosity. As the temperature increases, the viscosity decreases. Therefore, special attention should be paid to keeping the temperature of the liquid being measured constant near the specified temperature point, and for accurate measurement, it should not exceed 0.1°C.

Packing list：

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.