KairDa NDT290S+ Shore Hardness Gauge for rolls (printing integrated) brochure

Related products

KAIRDA NDT361 Penetrable coating Thickness Gauge 0.15-20 mm
0.15mm~ 20mm (steel) (single crystal probe)0.001mm15MHz

¥6500.0
SE
KAIRDA N1 standard probe eddy Current NDT530 Coating Thickness Gauge optional probe
eddy current0 ~ 1250µm±3%

¥660.0
SE
KAIRDA NDT110B pocket surface roughness Tester
digital displayRa、Rz、Rq、RtRaRq: 0.05μm ~ 15μmRzRt: 0.1μm ~ 50μm

¥2300.0
SE
KAIRDA N02 Ultrasonic Thickness Gauge Probe for measurement of coarse crystal materials such as cast iron
3.0~300mm2F12mm

SE
Leeb Hardness Tester KAIRDA NDT290 Portable Richter Hardness Tester with printer
170 ~ 960HLD19 ~ 651HB13.5 ~ 101.7HRB17.9 ~ 69.5HRC59.1 ~ 88HRA80 ~ 1042HV30.6 ~ 102.6HSAny (360 °)Steel and cast steel, alloy tool steel, stainless steel, gray cast iron, ductile iron, cast aluminum alloy, copper zinc alloy (brass), copper tin alloy (bronze), pure copper, forged steel

SE
Hardness test of roll Shore Hardness Gauge KAIRDA NDT290S cast steel roll, forged steel roll, cast iron roll
30 ~ 110HS170 ~ 960HLD19 ~ 651HB13 ~ 100HRB17 ~ 68.5HRC59 ~ 85HRA80 ~ 976HVAny (360 °)Steel and cast steel, alloy tool steel, stainless steel, gray cast iron, ductile iron, cast aluminum alloy, copper zinc alloy (brass), copper tin alloy (bronze), pure copper, forged steel, cast steel rolls, forged steel rolls, cast iron rolls

SE
KAIRDA NDT150A Surface Roughness Tester
Z-axis (vertical): 160μm; X-axis (horizontal): 17.5mm (0.69inch)0.002μm/±20μm；0.004μm/±40μm；0.008μm/±80μmRa、Rz==Ry(JIS)、Rq、Rt==Rmax、Rp、Rv、R3z、R3y、Rz(JIS)、Rs、Rsk、Rku、Rsm、Rmr、RPc、Rk、Rpk、Rvk、Mr1、Mr2

¥4000.0
SE
Roughness Gauge measurement platform KAIRDA KA520 swirling/spinning Roughness Gauge measurement platform
Measurement Platform

SE
KAIRDA NDT530 (F1) Galvanized Thickness Gauge with magnetic Induction Probe
Magnetic Induction0~1250μm±2%

¥1400.0
SE
Roughness Gauge Probes (Sensors) KAIRDA KS131 Deep Groove Probe
Deep groove probeIt can measure grooves with a groove width of more than 3mm and a groove depth of less than 10mm; or the surface Roughness of steps with a height of less than 10mm, and can also measure planes and cylinders.

SE

Recommended for more brochure