YOWEXA EC-666SX-P-A Thickness Gauge Manual,OI

Related products

Qnix Fe3mm magnetic thickness probe 3000μm
Magnetic Induction0~3000μm±2~3%

¥4300.0
SE
Defelsko PosiTector 6000 FRS3 Coating Thickness Gauge 90 ° probe
Magnetic Induction0~1500μm±1%

¥9280.0
SE
Libo F1 Probe for use with leeb220/222 Coating Thickness Gauge
magnetic induction0 ~ 1250µmLib 220, Lib 222

SE
JFL QDX film multi-purpose Detector film thickness, Hardness, adhesion and other performance detection
A. Cutting knife (1) 45 ° ± 1; b. Cutting knife (2) 26 ° 35, -1, -2; c. Cutting knife (3) 5 ° 40, + 3, + 2A. The spacing is: 1 + 0.01mm, 2 + 0.01mm; b. The straightness of the top of the ruler is: not less than 0.003mm, not less than 0.006mm; c. The working tooth tip angle: 30 ± 1 °R15+0.1mm

¥3450.0
SE
German EPK probe N1.6 eddy current Thickness Gauge probe, thickness range 0~1600um
Eddy Current0~1600μm5mm

¥8830.0
SE
Defelsko NRS split 90 ° conventional probe
Eddy Current0~1500μm±1%

¥5030.0
SE
Netherlands TQC Powder TAG LD5850 Powder coating thickness analyzer wet-film/Dry-Film thickness measurement
0~300μm±3%±1%

SE
German EPK probe N08 Cr eddy current Thickness Gauge probe, thickness range 0~80um
Eddy Current0~80μm5mm

¥9650.0
SE
DONGRU DR9000S anticorrosive layer Thickness Gauge 0~9500μm
Magnetic Induction0 ~ 9500µm±3%

¥1680.0
SE
JINGKELIAN QDX paint film multi-purpose Detector
GB/T9286-88 　GB/T134522-92 　 GB/T9275-886 blades, spacing: 1mm, 2mm thickness measuring cutting blade angle; 45 degrees, 26 degrees 35 minutes, 5 degrees 40 minutes500+/-5g

¥1700.0
SE

Recommended for more manual