China

CHENCHI CNY-1 Initial viscosity Tester Aluminum profile design

SE
The initial tack is tested by the inclined rolling ball method, and the adjustable tilt angle is 0~40 °. The steel ball is made of GCr15 bearing steel, and the accuracy exceeds GB/T308 grade 40.
$319.00/set
PromotionLoading...
Coupon
Model：
Certificate
Contact
Details SPEC Con CAT
Similar products

labchen CNY-1 Initial viscosity TesterSPEC

labchen CNY-1 Initial viscosity TesterDetails

labchen CNY-1 Initial viscosity TesterPacking list

SKU
NB042655
Adjustable tilt angle
0～40°
Countertop width
120mm
Test area width
80mm
Dimensions
380(L)mm×150(B)mm×180(H)mm
Weight
5kg
CNY-1
Initial viscosity Tester
The initial tack is tested by the inclined rolling ball method, and the adjustable tilt angle is 0~40 °. The steel ball is made of GCr15 bearing steel, and the accuracy exceeds GB/T308 grade 40.
CHENCHI CNY-1 Initial viscosity Tester Aluminum profile design Picture

Introduction

Using the inclined surface rolling ball method, the initial tack of the sample is tested by the adhesion of adhesive tapes, labels and other products to the steel ball when the steel ball and the sticky surface of the test sample are in short-term contact with a small pressure.

Features

  • The overall good aluminum profile design, beautiful and durable

  • Innovative precision control angle adjustment device, more convenient angle adjustment,

  • The fine steel ball position adjustment knob is convenient for adjusting the position of the steel ball in front, back, left and right

  • The steel ball is made of GCr15 bearing steel, and the precision level of the shape tolerance and surface roughness of the steel ball exceeds the grade 40 stipulated in GB/T308.

According to the standard

GB/T4852 "Pressure Sensitive Tape Initial Adhesion Test Method - Rolling Ball Method"

FAQ
QI want to test the initial tack of the tape, which instrument is suitable?
A CNY-1 Initial viscosity tester adopts the inclined surface rolling ball method to measure the initial adhesion by the short contact between the steel ball and the tape, which fully complies with the GB/T4852 national standard and is especially suitable for the mass inspection of tapes, labels and other products.
QInitial viscosity tester which use more scenarios?
A It is mainly used in adhesive products factories, label manufacturers and Quality inspection organizations to detect whether the initial tack of tapes and labels is up to standard. Because of the use of precision steel balls and adjustable angle design, it can accurately simulate the initial adhesion performance when actually pasting.
Standard
Filter Brand Store Contact