CHENCHI TQD-1 paper Air permeability meter 0~17 m/(Pa.s)

TQD-1

Air permeability meter

The test area is 10 +/- 0.05cm ², the sample size is 60 × 100mm, and the inner diameter of the clamping ring is 35.68 +/- 0.05mm, which conforms to QB/T1667 and GB/T458 standards.

Introduction

Under specified conditions, under unit time and unit pressure difference, the average air flow rate per unit area of paper passes.

The instrument is suitable for the determination of the medium air permeability range of paper and cardboard from 1×10-2 to 1×102um/(Pa.S). The structural parameters and technical performance of the instrument are in line with the requirements of relevant standards such as QB/T1667-98 "Paper and Cardboard Air Permeability Tester", GB/T458-2008 "Paper and Cardboard Air Permeability Test Method".

product structure

1. The instrument is composed of a container on a fixed pillar, a paper sample clamp ring and a pressure gauge.

2. The upper part of the container is equipped with a breathable valve and a water filling valve with a funnel to inject into the container.

3. The bottom of the container is equipped with an overflow valve and a regulating valve for controlling the flow of water.

4. The paper sample clamp ring is fixed on the bracket, and there is a hole with an area of 10cm² on the paper sample clamp ring and the air box.

5. The air box is located under the paper sample clamp ring, and there are two joints on it, which are respectively connected with the exhaust pipe and the pressure gauge with rubber hoses. Adjusting bolts to adjust the horizontal position of the instrument.

According to the standard

QB/T1667-98 "Paper and cardboard air permeability Tester", GB/T458-2008 "Paper and cardboard air permeability test method"

Packing list：complete-built unit X1, manual X1, certificate of conformity X1, warranty card X1

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.