China

TSINGTAO TOKY MS7100TS Wood Moisture Analyzer 3~ 80%

SE
Conductivity Detector measurement, range 3~ 80%, display accuracy 0.1, with temperature Humidity compensation technology, small size, light weight, strong anti-interference performance, can be customized 4~ 20mA output, equipped with 11 kinds of powder grain code.
$153.00/set
PromotionLoading...
Coupon
Model：
Certificate
Contact
Details SPEC Con
Similar products

TSINGTAO TOKY MS7100TS Wood Moisture AnalyzerSPEC

TSINGTAO TOKY MS7100TS Wood Moisture AnalyzerDetails

TSINGTAO TOKY MS7100TS Wood Moisture AnalyzerPacking list

SKU
NB042982
Display
Large screen LCD digital display with backlight
Measurement range
3~80%
Display Accuracy
0.1
Ambient Temperature
-10℃~60℃
Relative Humidity
5~ 85% (no condensation)
Response time
1s
Power
4 AA batteries
Weight
About 175g
Powdered Grain Code
11 kinds
Measurement principle
Conductivity Detector, temperature compensation
Accuracy
±0.5%
MS7100TS
Wood Moisture Analyzer
Conductivity Detector measurement, range 3~ 80%, display accuracy 0.1, with temperature Humidity compensation technology, small size, light weight, strong anti-interference performance, can be customized 4~ 20mA output, equipped with 11 kinds of powder grain code.
TSINGTAO TOKY MS7100TS Wood Moisture Analyzer 3~ 80% Picture

Introduction

MS7100TS veneer Moisture Meter is mainly used to measure all kinds of veneer (or veneer), veneer, veneer and other sheet-type wood products. It is suitable for furniture manufacturing, floor manufacturing, musical instrument manufacturing, architectural decoration, automobile and aircraft interior decoration, handicrafts and other industries. The instrument uses a needle-free sensor design to measure data without destroying the veneer. It has high measurement accuracy and stable performance. It is a suitable choice for testing the moisture content of related products.

Features

  • Through the temperature and humidity compensation technology, the measurement accuracy is high and the stability is good.

  • The measurement speed is fast, which can replace the traditional oven method, shorten the moisture determination time, the whole process operation is less than 1 minute, and the measured value is displayed immediately, which greatly saves the precious time of the testing personnel.

  • Small size, light weight, strong anti-interference performance, can be carried on-site for rapid detection.

  • Backlit liquid crystal display technology, clear display, low power consumption.

  • Alarm function, the function of holding the maximum value of the measured value.

  • Automatic shutdown power saving function.

  • RS232/RS485/USB/Bluetooth data transmission can be customized.

  • 4~20mA output can be customized.

FAQ
QI want to measure the moisture of the veneer, is there any instrument that does not stick a needle recommended?
A TSINGTAO TOKY's MS7100TS wood moisture meter is recommended. It is designed with needle-free Sensors, which does not need to be inserted into the veneer during measurement, and will not damage the surface of the sample at all. It is suitable for the detection of fine materials such as veneer and thin plates.
QI want to measure the moisture of the veneer, but I am afraid of damaging the surface. What is your recommendation?
A MS7100TS wood moisture meter adopts the design of needle-free Sensors, which does not need to be inserted into the veneer during measurement, and will not damage the surface at all. It is especially suitable for fine materials such as veneer and sheet, and the measurement is accurate and safe.
QMoisture content measuring instrument is recommended?
A MS7100TS Wood Moisture Analyzer uses needle-free Sensors design, does not need to destroy the veneer can be accurate measurement, suitable for veneer, sheet and other sheet wood products, Measurement range 3~ 80%, accuracy +/- 0.5%, very suitable for furniture manufacturing, floor manufacturing and other industries.
QDo you need a Moisture Analyzer that can transfer data?
A MS7100TS supports customized RS232/RS485/USB/Bluetooth data transmission, and can also customize 4~ 20mA output. It adopts temperature and Humidity compensation technology, which makes the measurement stable and accurate, and is suitable for occasions that require data recording and transmission.
QThe moisture meter for measuring wood chips, the wood chips are about 0.5mm.
A This one can be considered, but it cannot be sensed if it is too thick.
QCan only test more than 3% moisture?
A Portable moisture meters should preferably start with more than 6 moisture meters. In addition, if the wood chips are too thick, they will not be sensed. It is difficult to measure if they are more than 2 cm.
Standard
Filter Brand Store Contact