China

MODERNER KTQ-100 adjustable Coating Applicator 0~5mm/10cm

SE
0~5000 micron adjustable large range, double-ended differentiator adjustment at any time Preparative 10 micron multiple different wet-film, aluminum alloy body, 4 different film widths optional.
Model：
Certificate
Contact
Details SPEC Con VIDEO CAT OI
Similar products

Moderner KTQ-100 Micrometer Film ApplicatorSPEC

Moderner KTQ-100 Micrometer Film ApplicatorDetails

Moderner KTQ-100 Micrometer Film ApplicatorPacking list

SKU
NB004313
type
adjustable
WFT
0~5000μm
application width
100mm
Accuracy
±10μm
material
aluminum alloy
size
114*76*100mm
Net Weight
400g
KTQ-100
Micrometer Film Applicator
0~5000 micron adjustable large range, double-ended differentiator adjustment at any time Preparative 10 micron multiple different wet-film, aluminum alloy body, 4 different film widths optional.
MODERNER KTQ-100 adjustable Coating Applicator 0~5mm/10cm Picture

Introduction

MODERNER KTQ-II adjustable Film Applicator is a Film Applicator that can adjust the thickness of the coating film. There are two differentiators above the adjustable Film Applicator. By adjusting the two differentiators of the Film Applicator, it can move up and down. Adjust the scraper below to control the gap, which is the thickness of the final coating. The scraper gap is in units of 10 microns, and the coating film ranges from 0 to 3500 and 0 to 5000. Different adjustable Film Applicators have different dimensions and weights.

Specifications

modelCoating width
KTQ-5050mm
KTQ-100100mm
KTQ-150150mm
KTQ-200200mm
Other parameters
Film thickness range0~5000μm
precision10μm

operation method

1) Before using the adjustable Film Applicator, you should check whether it is adjusted to the "0" position. If it is not at the "0" position, you should adjust the adjustable Film Applicator to "0" on the parallel plate. When adjusting to "0", rotate The two differentiators above make the bottom of the scraper and the bottom of the two side plates on the same plane. At this time, the counts of the two differentiators should be the same, and the "0" scale at the upper end of the differentiator is aligned with the scale line at the lower end.

2) Rotate the differentiator to adjust the scraper to the required gap, that is, the required coating thickness. Then hold the two sides of the board and scrape on the sample board to prepare the required coating.

3) After using the Film Applicator, wash and dry the Film Applicator with an appropriate solvent.

4) Adjust the scraper so that the spring is in a relaxed state to reduce the fatigue of the spring. Store the adjustable Film Applicator in a wooden box to protect it from moisture.

Pictures

MODERNER KTQ-100 adjustable applicator display

MODERNER KTQ-100 Adjustable Applicator Regulator Details

Appearance of MODERNER KTQ-100 adjustable applicator

Details of MODERNER KTQ-100 adjustable applicator


FAQ
QIs it okay to use it on paint? Can this instrument be used if the thickness of the spcc steel plate film is 50-150 μm?
A Yes, the main consideration is that the substrate width must be greater than the overall width of the Micrometer Film Applicator
QI want to apply 2mm thick water-based paints, but I don't know what tool to use for 1-2mm.
A Micrometer Film Applicators
QCan this one be customized with a range thickness of 0~ 10mm?
A It's too thick to do.
QI make water-based samples, which are a little sticky. Can you wash them with water? Will blisters affect the accuracy?
A It will not affect the accuracy, and the cleaning can be selected according to your material characteristics. Because it is a straight scraper, cleaning is still very convenient.
QHow many mm is the adjustable Applicator?
A Hello, one turn is half a mm, and two turns are 1mm.
QWhat is the film accuracy of KTQ adjustable Film Applicator?
A Hello, the accuracy of the KTQ-100 adjustable Film Applicator you see is 10μm.
QIs This Adjustable Film Applicator Affected by Moisture?
A Hello, this Film Applicator is made of aluminum alloy, which has a better anti-rust effect, but you also need to put it back in the wooden box after each use. After all, moisture also has a certain impact on these fine instruments.
QI want to do a test on the JB/T7663.2 standard. Is this Micrometer Film Applicator OK?
A Sure
QCan this differential film be coated with a film thickness of 10 um or less?
A No, the scale interval of the differentiator is 10 μm, and the ultra-thin Spreader recommends using a wire rod.
Standard
Filter Brand Store Contact