China

TRUIT TR 1002/4 Ford Viscosity Cup outflow aperture φ4.12mm

SE
In line with ASTM standards, the outflow aperture is φ4.12mm, the measurement viscosity range is 70~370cst, the filter is made of high-quality stainless steel, and the volume is 100ml.
$125.00/piece
PromotionLoading...
Coupon
Model：
Certificate
Contact
Details SPEC Con CAT
Similar products

TRUIT TR 1002 / 4 Ford Viscosity CupSPEC

TRUIT TR 1002 / 4 Ford Viscosity CupDetails

TRUIT TR 1002 / 4 Ford Viscosity CupPacking list

SKU
NB043162
outflow time
20～105sec
Viscosity range
70～370cst
Capacity
100ml
Nozzle material
High quality stainless steel
Main material
High quality aluminum alloy (anodic oxidation)
Cup size
Top outer diameter Φ82mm, cup body outer diameter Φ56mm
TR 1002 / 4
Ford Viscosity Cup
In line with ASTM standards, the outflow aperture is φ4.12mm, the measurement viscosity range is 70~370cst, the filter is made of high-quality stainless steel, and the volume is 100ml.
TRUIT TR 1002/4 Ford Viscosity Cup outflow aperture φ4.12mm Picture

Introduction

Ford (FORD) Viscosity Cup is a commonly used flow time cup for measuring the viscosity of liquids. It is designed according to the Ford (FORD) standard for evaluating the viscosity characteristics of materials such as paints, varnishes and coatings. There is a small hole at the bottom of it, and the cup body is made of high-quality aluminum with a capacity of about 100ml. The viscosity of the material can be evaluated by measuring the time required for a certain volume of sample in the cup to flow out of the small hole at the bottom, which can be used A specific formula converts the flow time to a viscosity value.

TR 1002 series Ford cups are made of high-quality aluminum alloy, with a capacity of 100ml and a variety of aperture specifications to choose from. They are designed in accordance with ASTM D1200, ASTM D 333, and ASTM D 365 standards. Widely used in the paint, paint and coating industry, especially in the field of automobile manufacturing and restoration.

Features

  • Main material: high-quality aluminum alloy (anodized)

  • Nozzle material: high quality stainless steel

  • Capacity: 100ml

  • Cup body size: top outer diameter φ82mm, cup body outer diameter φ56mm

Series

order numberOutflow aperture (mm)Measuring range (cst)Outflow time (sec)
TR 1002/1φ1.9010～3555～100
TR 1002/2φ2.5325～12040～100
TR 1002/3φ3.4049～22025～105
TR 1002/4φ4.1270～37020～105
TR 1002/5φ5.20200～120020～105
FAQ
QI want to measure the viscosity of the paint, probably around 200cSt, which model of Ford viscosity cup should I choose?
A The TR 1002/4 model is recommended. Because its Measurement range is 70 to 370cSt, it exactly covers the value of 200cSt. Its pore size is 4.12mm, and the outflow time is between 20 and 105 seconds. For coatings in your viscosity range, the measurement time is appropriate and the result will be more accurate.
QIs the pore size the main difference between these models of Ford viscosity cups? How can I choose according to my sample?
A Yes, the main difference is the diameter of the flow hole at the bottom. The key to selection is to look at the estimated viscosity of your sample. Simply put, the thinner the sample (low viscosity), choose the smaller pore size (such as TR 1002/1); the thicker the sample (high viscosity), choose the larger pore size (such as TR 1002/5). The goal is to have the sample flow time fall within the ideal range of 20 to 105 seconds. Too short or too long will affect the accuracy. If you are not sure, you can tell us the type or approximate viscosity of your sample and recommend it for you.
Knowledge
Standard
Filter Brand Store Contact