China

TRUIT TR 1010/2 Paint-4 cups, desktop four cups

SE
Copper cup + bracket, capacity 100 +/- 1ml, inner diameter φ49.5 +/- 0.2mm, in line with GB/T 1723 standard.
$162.00/set
PromotionLoading...
Coupon
Model：
Certificate
Contact
Details SPEC Con CAT
Similar products

TRUIT TR 1010/2 Tu - 4 cupsSPEC

TRUIT TR 1010/2 Tu - 4 cupsDetails

TRUIT TR 1010/2 Tu - 4 cupsPacking list

SKU
NB043183
Applicable standards
GB/T 1723
Capacity
100ml
inner diameter
φ49.5±0.2mm
Flow hole diameter
4mm
Flow hole length
4±0.2mm
Inner cone angle
81°± 15′
Flow hole diameter error
±0.2mm
TR 1010/2
Tu - 4 cups
Copper cup + bracket, capacity 100 +/- 1ml, inner diameter φ49.5 +/- 0.2mm, in line with GB/T 1723 standard.
TRUIT TR 1010/2 Paint-4 cups, desktop four cups Picture

Introduction

TR 1010/2 Tu-4 cups are equipped with a copper cup and a stand, suitable for laboratory viscosity testing, with a capacity of 100±1ml.

Tu-4 cup is designed in accordance with GB/T 1723 standard. It is usually suitable for viscosity measurement of products with an outflow time of less than 150 seconds. The time for a certain amount of sample and a certain temperature to flow out of a hole with a specified aperture is in seconds. (s) said.

The obtained sample outflow time t (s)

Use the following formula to convert to kinematic viscosity value (mm2/s):

When t<23s, t=0.154μ+11

When 23s≤t≤150s, t=0.223μ+6.0

FAQ
QIn what occasions are 4 cups generally used to measure viscosity?
A It is often used in laboratory testing of coatings, inks, varnishes and other fluids, and is suitable for products with an outflow time of less than 150 seconds. For example, check the viscosity before paints are applied to ensure uniform painting effect.
QWhat are the main functions of choosing 4 cups?
A The choice of it mainly depends on the diameter of the flow hole 4mm and the capacity of 100ml. It is suitable for measuring medium and low viscosity fluids. When operating, you only need to record the number of seconds flowing out, and the viscosity can be calculated by formula, which is convenient and fast without complex equipment.
QI want to test the viscosity of paints, is it appropriate to apply -4 cups with TR 1010/2?
A Suitable, TR 1010/2 coating -4 cup is specially designed for fluid viscosity testing such as paints and coatings. It conforms to GB/T 1723 standard, and the measurement of samples with outflow time below 150 seconds is particularly accurate. The operation is simple, and the viscosity value can be converted directly by reading seconds.
Knowledge
Standard
Filter Brand Store Contact