TRUIT TR 1203/050 Wide-channel Fineness meter 0~50μm
SE
TR 1203 / 050
TRUIT TR 1203 / 050 Wide-channel Fineness gaugeSPEC
TRUIT TR 1203 / 050 Wide-channel Fineness gaugeDetails
TRUIT TR 1203 / 050 Wide-channel Fineness gaugePacking list
- SKU
- NB043200
- Scraper material
- Wear and corrosion resistant alloy steel
- Hardness
- 52±2HRC
- drawdown blade
- Upper and lower working surfaces
- range
- 0~50μm
- Graduation
- 2.5μm
- Number of grooves
- 1
- Groove size
- 140*37mm
- Scraper type
- wide-channel
Introduction
TR 1203 Fineness Meter is a standard single wide groove Fineness of Grind Gauge with five different measuring ranges of 0~15, 0~25, 0~50, 0~100, 0~150, and the groove size is 140×37mm , using high-quality wear-resistant and corrosion-resistant alloy steel with a hardness of 52±2HRC to ensure its long service life. It is suitable for the measurement of various materials and has a wide range of Applications.
Standards
Comply with GB/T 1724, GB/T 6753.1, GB/T 13217.3, ISO 1524 and other standards.
Applications
It is used to measure the particle size and degree of dispersion of pigments and impurities in paint, paint, plastic, ink, paper, ceramics, medicine, food, cosmetics, etc. and other liquids and slurries, so as to control the production, storage and application of dispersed products. in the quality.
Series
| order number | Measuring range (μm) | Graduation value (μm) | Groove size |
| TR 1201/015 | 0-15 | 0.75 | 140×12.5 |
| TR 1201/025 | 0-25 | 1.25 | |
| TR 1201/050 | 0-50 | 2.5 | |
| TR 1201/100 | 0-100 | 5 | |
| TR 1201/150 | 0-150 | 7.5 | |
| TR 1202/015 | 0-15 | 0.75 | 140×12.5 |
| TR 1202/025 | 0-25 | 1.25 | |
| TR 1202/050 | 0-50 | 2.5 | |
| TR 1202/100 | 0-100 | 5 | |
| TR 1202/150 | 0-150 | 7.5 | |
| TR 1203/015 | 0-15 | 0.75 | 140×37 |
| TR 1203/025 | 0-25 | 1.25 | |
| TR 1203/050 | 0-50 | 2.5 | |
| TR 1203/100 | 0-100 | 5 | |
| TR 1203/150 | 0-150 | 7.5 |
Note: TR1201 is a single-slot fineness gauge, TR1202 is a double-slot fineness gauge, and TR1203 is a single-slot fineness gauge.
- 1GB/T 17001.3-2025《Anti-counterfeiting printing ink—Part 3：Thermochromic anti-counterfeiting printing ink》
- 2HG/T 5173-2017《Waterborne primer for application on rusty substrates》
- 3WJ 2669-2005《Specification for cathode electrophoresis paint for shell》
- 4GB/T 42541-2023《Coated steel pipes for gas piping》
- 5GB/T 1724-2019《Paints,varnishes and printing inks—Determination of fineness of grind》
- 6GB/T 5211.17-1988《Comparison of contrast ratio(hiding power)of white pigments》
- 7ISO 1524-2020《Paints, Varnishes And Printing Inks - Determination Of Fineness Of Grind》
- 8HG/T 4758-2014《Water-based acrylic resin coatings》
- 9GB/T 13217.3-2008《Test method for fineness of grind of liquid ink》
- 10ISO 1524-2000《Paints, varnishes and Printing inks - Determination of ground fineness》