TRUIT TR 3004/80/1 paints Applicator 5/10/15/20μm
SE4-Sided Applicator, wet film thickness of 5, 10, 15, 20 μm, Application width of 80mm, using high-quality wear-resistant corrosion-resistant alloy steel.
$183.00/piece
PromotionLoading...
Coupon
Model：
TR 3004 / 80 / 1
Similar products
-
JINGKELIAN SZQ 5/10/15/20 4-sided Applicator film thickness 5/10/15/20μm$ 141.00SE -
TRUIT TR 3004/160/1 Four-sided Paint Film Applicator 5/10/15/20μm$ 209.00SE -
CHINA 4-sided wet-Film Applicator SZQ-80 05/10/15/20μm$ 187.00SE -
CHINA SZQ-150 5/10/15/20μm Paint Film Applicator 4-sided Applicator$ 257.00SE
TRUIT TR 3004 / 80 / 1 4-Sided ApplicatorsSPEC
TRUIT TR 3004 / 80 / 1 4-Sided ApplicatorsDetails
TRUIT TR 3004 / 80 / 1 4-Sided ApplicatorsPacking list
- SKU
- NB043235
- Effective Application Width
- 80mm
- Total length
- 110mm
- thickness
- 5μm 、 10μm 、 15μm 、 20μm
- material
- High quality wear-resistant and corrosion-resistant alloy steel
TR 3004 / 80 / 1
4-Sided Applicators
4-Sided Applicator, wet film thickness of 5, 10, 15, 20 μm, Application width of 80mm, using high-quality wear-resistant corrosion-resistant alloy steel.
Introduction
The four-sided wet Film Applicator is suitable for the preparation of various paints and coatings, including paints, adhesives, inks, etc. It can provide uniform, consistent coatings and can achieve different thicknesses of coating films on different sample surfaces. TR 3004 series Wet Film Applicator is made of high-quality wear-resistant and corrosion-resistant alloy steel. The film thickness of TR 3004/80/1 is5, 10, 15, 20 μm, coating width 80mm.
Wet Film Applicators provide precise control of wet or dry film thickness. During routine quality control and research and development tests, the coating's hiding power, opacity, scrub resistance, anti-sag performance and other quality tests require a consistent and repeatable coating.
Series
| order number | Thickness (μm) | Coating film width (mm) |
| TR 3004/80/1 | 5, 10, 15, 20 | 80 |
| TR 3004/80/2 | 10, 20, 30, 40 | 80 |
| TR 3004/80/3 | 20, 40, 60, 80 | 80 |
| TR 3004/80/4 | 25, 50, 75, 100 | 80 |
| TR 3004/80/5 | 30, 60, 90, 120 | 80 |
| TR 3004/80/6 | 50, 75, 100, 150 | 80 |
| TR 3004/80/7 | 50, 100, 150, 200 | 80 |
| TR 3004/80/8 | 100, 150, 200, 250 | 80 |
| TR 3004/80/9 | 100, 200, 300, 400 | 80 |
| TR 3004/80/10 | 250, 500, 700, 1000 | 80 |
| TR 3004/160/1 | 5, 10, 15, 20 | 160 |
| TR 3004/160/2 | 10, 20, 30, 40 | 160 |
| TR 3004/160/3 | 20, 40, 60, 160 | 160 |
| TR 3004/160/4 | 25, 50, 75, 100 | 160 |
| TR 3004/160/5 | 30, 60, 90, 120 | 160 |
| TR 3004/160/6 | 50, 75, 100, 150 | 160 |
| TR 3004/160/7 | 50, 100, 150, 200 | 160 |
| TR 3004/160/8 | 100, 150, 200, 250 | 160 |
| TR 3004/160/9 | 100, 200, 300, 400 | 160 |
| TR 3004/160/10 | 250, 500, 700, 1000 | 160 |
FAQ
QHow to avoid bubbles or inhomogeneities during wet-film preparation?
A
Avoid bubbles or inhomogeneities by optimizing solution pretreatment, controlling Spreader speed and substrate handling, and using vacuum or vibrating defoaming units.