TRUIT TR 3004/80/2 Lacquer Film Applicator 10/20/30/40μm
SE4-Sided Applicator, wet film thickness of 10, 20, 30, 40μm, Application width of 80mm, using high-quality wear-resistant corrosion-resistant alloy steel.
$183.00/piece
PromotionLoading...
Coupon
Model：
TR 3004 / 80 / 2
TRUIT TR 3004 / 80 / 2 4-Sided ApplicatorsSPEC
TRUIT TR 3004 / 80 / 2 4-Sided ApplicatorsDetails
TRUIT TR 3004 / 80 / 2 4-Sided ApplicatorsPacking list
- SKU
- NB043236
- Effective Application Width
- 80mm
- Total length
- 110mm
- thickness
- 10μ m 、 20μ m 、 30μ m 、 40μ m
- material
- High quality wear-resistant and corrosion-resistant alloy steel
TR 3004 / 80 / 2
4-Sided Applicators
4-Sided Applicator, wet film thickness of 10, 20, 30, 40μm, Application width of 80mm, using high-quality wear-resistant corrosion-resistant alloy steel.
Introduction
The four-sided wet Film Applicator is suitable for the preparation of various paints and coatings, including paints, adhesives, inks, etc. It can provide uniform, consistent coatings and can achieve different thicknesses of coating films on different sample surfaces. TR 3004 series Wet Film Applicator is made of high-quality wear-resistant and corrosion-resistant alloy steel. The film thickness of TR 3004/80/2 is10, 20, 30 , 40 μm, coating width 80mm.
Wet Film Applicators provide precise control of wet or dry film thickness. During routine quality control and research and development tests, the coating's hiding power, opacity, scrub resistance, anti-sag performance and other quality tests require a consistent and repeatable coating.
Series
| order number | Thickness (μm) | Coating film width (mm) |
| TR 3004/80/1 | 5, 10, 15, 20 | 80 |
| TR 3004/80/2 | 10, 20, 30, 40 | 80 |
| TR 3004/80/3 | 20, 40, 60, 80 | 80 |
| TR 3004/80/4 | 25, 50, 75, 100 | 80 |
| TR 3004/80/5 | 30, 60, 90, 120 | 80 |
| TR 3004/80/6 | 50, 75, 100, 150 | 80 |
| TR 3004/80/7 | 50, 100, 150, 200 | 80 |
| TR 3004/80/8 | 100, 150, 200, 250 | 80 |
| TR 3004/80/9 | 100, 200, 300, 400 | 80 |
| TR 3004/80/10 | 250, 500, 700, 1000 | 80 |
| TR 3004/160/1 | 5, 10, 15, 20 | 160 |
| TR 3004/160/2 | 10, 20, 30, 40 | 160 |
| TR 3004/160/3 | 20, 40, 60, 160 | 160 |
| TR 3004/160/4 | 25, 50, 75, 100 | 160 |
| TR 3004/160/5 | 30, 60, 90, 120 | 160 |
| TR 3004/160/6 | 50, 75, 100, 150 | 160 |
| TR 3004/160/7 | 50, 100, 150, 200 | 160 |
| TR 3004/160/8 | 100, 150, 200, 250 | 160 |
| TR 3004/160/9 | 100, 200, 300, 400 | 160 |
| TR 3004/160/10 | 250, 500, 700, 1000 | 160 |
FAQ
QHow does the Spreader Speed in Film Applicators affect the performance of the final film?
A
Spreader speed affects the uniformity and thickness distribution of the coating, too fast may lead to uneven coating, too slow may increase the preparation time and energy consumption, so it is necessary to choose the appropriate Spreader speed according to the requirements.
QHow is solvent recovery and treatment for Film Applicators performed?
A
Volatile solvents can be recovered and properly treated or reused through the equipment's built-in solvent recovery system or external solvent recovery unit.