CHINA BLD-105A EN sole folding testing machine

BLD-105A

EN sole folding test machine

The zigzag angle (90 +/- 2) °, the speed (5 to 150) r/min can be adjusted, and the diameter of the zigzag shaft is 30mm, which can measure three outsoles simultaneously.

Introduction

The sole test piece is installed on the EN flex testing machine, so that the incision falls directly above the center of the rotating shaft of the EN tortuous testing machine, and the test specimen is driven by the EN tortuous testing machine to stretch (90±2)º bend on the shaft, after a certain number of tests, the length of the incision of the test specimen is measured, and the flex resistance of the test sole is evaluated by the size of the incision growth rate, and three outsoles can be measured at the same time.

accord withstandard

GB/T20991, GB21148, SATRA TM161, EN20344, ISO-17707, EN344 and other standards.

Packing list：machine X1, manual X1, certificate X1, warranty card X1

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.