CHINA BLD-103 ROSS tortuous testing machine

BLD-103

ROSS tortuous testing machine

The zigzag angle (90 +/- 2) °, the speed can be switched between 60r/min and 100r/min, the diameter of the zigzag shaft is 10mm, and six outsoles or 12 test pieces can be measured.

Introduction

The sole strip test piece is installed on the ROSS flex testing machine, so that the inchement falls directly above the center of the rotating shaft of the ROSS tortuous testing machine, and the test specimen is driven to bend freely on the shaft by the ROSS tortuous testing machine, and after a certain number of tests, the length of the incision of the test specimen is measured, and the flexural resistance of the test sole is evaluated by the size of the incision growth rate, and six outsoles or 12 test pieces can be measured.

Meets standards

Comply with GB/T21148, ASTM D1052, ISO 5423, SATRA TM60, HB-T2411 and other standards.

Packing list：machine X1, manual X1, certificate X1, warranty card X1

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.