Pushen QXD-25um single-channe Fineness gauge 0-25μm

QXD-25um

Single-channe Fineness gauge

Introduction

Pushen ISO Fineness of Grind Gauge has five models : PU-2410, PU-2411 , PU-2412, PU-2413, PU-2414, and the corresponding measuring ranges are 0-15 microns, 0-25 microns , 0- 50 microns, 0-100 microns, 0-150 microns. PU-2410/ 2411 /2412/2413/2414 single-slot Grindometers are all of the same size, and the slot width is 12mm, with a single groove. The outer packaging box of the single-slot Fineness of Grind Gauge is a black tool box with built-in shockproof cotton and a product certificate.

Pushen ISO Fineness of Grind Gauge is made of stainless steel, with a groove width of 12mm, suitable for multiple micron ranges such as 0~150, fine workmanship, suitable for coating ink and other industries, and widely used.

Pictures

Product application industry

Pushen PU-/2411 ISO Fineness of Grind Gauge can not only measure the fineness of paint, but also can measure the fineness of many materials such as coatings, pigments, raw materials, plastics, printing inks, etc. In chocolate, ceramics, paper, medicine, food and other industries, the single-slot Grinder can also be used to test the fineness of products, and there are more Applications.

Care and Maintenance Instructions for Single Groove Grinding Fineness Meter

1) The ISO Grindometer needs to be washed and coated with anti-rust oil after use to prevent rust.

2) Do not bump the surface of the scraper and the scraper path to prevent damage.

3) Regularly check the straightness of the scraper and knife edge every year, and replace the Pushen PU-2410/2411/2412/2413/2414 single-slot Grindometer that does not meet the standard in time.

Suggested reading of the operation manual :

Pushin Fineness of Grind Gauge operation manual.pdf

Packing list：Scraper x1, Scraper x1, Instruction Manual x1, Plastic Encasement Box x1, Product Certificate x1

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.