PUSHEN /Pushen SZQ-50 Single Sided Film Applicator 50μm

SZQ-50um

Single Side Film Applicator

Single-sided, wet film thickness 50μm, Spreader width 100mm, material stainless steel, size 128mm.

Introduction

Pushen SZQ-25/37.5/ 50 /75 single-sided Wet Film Applicator is made of high-grade stainless steel to ensure that the applicator is not corroded by acidic or alkaline substances in paint or cleaning agents. SZQ-25/37.5/50/75 single-sided Wet Film Applicator is mainly used to coat a certain thickness of wet film to measure the color and hiding power of the sample or prepare a sample, etc.

Specifications

Introduction of paint leveling

The so-called leveling property of the coating refers to the smooth and smooth state of the coating film after the coating is applied. The surface with good leveling property should have no irregularities such as orange peel, brush marks, ripples, and shrinkage cavities. Usually people directly observe with the naked eye to compare the sample with the standard sample in parallel to judge the quality of the leveling property of the coating film. This method varies from person to person and is highly subjective.

The importance of coating

The reliability of laboratory tests is directly related to the quality of the samples provided, any kind of test carried out on such coatings, appearance characteristics or physical characteristics (such as color, hiding power, gloss, drying time, etc.). When testing, the samples need to be uniform and comparable, with precise thickness control, and the applicator is the tool that provides this uniform coating effect.

Pictures

Application

Packing list：Coating applicator x1

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.