Film thickness 148.6μm, wire-wound Spreader process, Wire diameter 1.65mm, effective Spreader width of 30cm, is a wear-resistant Mayer Rods imported from the United States.
Film thickness 148.6μm, wire-wound Spreader process, Wire diameter 1.65mm, effective Spreader width of 30cm, is a wear-resistant Mayer Rods imported from the United States.
Packing list:Stainless Steel Rod X1 Transparent Encasement Hose X1
[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
QI want to coat the coating evenly on the wood. Which type of rod do you suggest I buy?
Around 150a
A
65 gauge rod, 3/8 diameter recommended.
QI put it on the pet substrate and scrape it with UV glue. The wire rod has several thicknesses. Can you only have one thickness when you buy a wire rod?
A
Different rod numbers correspond to different wet film thicknesses. The thickest is 200um. If you want to scrape 300um wet film thickness, use Film Applicator.
QHello, what rds Spreader is used for 0.15mm Film thickness?
A
Hello, 0.15mm is 150μm, and you can use the 65 #rod of RDS.
QIs there a cash sale for this Mayer Rods? Is it from Wire-Wound?
A
Hello, the inventory can be viewed directly on the product page. This RDS65 #wire rod is wound.
QWhat is the thickness of the RDS65 #Mayer-Rod film in the United States?
A
Hello, the wet film thickness of Spreader is 148.6μm.
QDo you support customization? Such as wet film thickness and length?
A
Spreader rod length and main rod diameter support customization, but wet film thickness RDS has provided dozens of specifications covering more than 200 microns, and in principle does not accept customization.
QIs this the Applicator rod mentioned in GB/T13217.1?
A
OK
QCan silicone coatings be applied to quartz Glass substrates?
A
Yes, choose quartz Glass as the substrate, with Mayer Rods Coating prepared above coated on the surface of the treated quartz Glass substrate, at room temperature to evaporate the solvent into the oven, at a certain temperature curing film formation.
QThe diameter of the wire rod of RDS is 9.4 mm?
A
Hello, yes.
QRDS3/8; What model is this?
A
Hello, this is a series of RDS wire rods, 3/8; it refers to RDS wire rods with a diameter of about 10mm.