Defelsko PosiTest CH cross-cut adhesion machine, set ISO2409 1mm/6 teeth

CHKITISO6X1

Cross-cut Adhesion Tester

Number of cutter teeth 6, cutter tooth spacing 1mm, suitable for film thickness environment 0~60μm, cutter head material hardened, application standard ISO 2409.

Introduction

Cross-scratch adhesion TesterAccording to ISO 2409 and ASTM D3359, the ability of the coating to resist separation from the substrate is determined when cutting a lattice pattern on the coating.

All tools and accessories needed to perform the cross-scratch test are included.Ergonomically designed tool grip with non-slip grip for comfortable all-day use.The rotatable cutting head ensures proper positioning and uniform cutting surface pressure.Easy-to-change, hardened steel blade with 4 cutting edges for longer testing.Tapes are available in accordance with ISO 2409 or ASTM D3359.

peculiarity

Includes all tools and accessories required for cross-scratch testing in accordance with ISO 2409 and ASTM D3359

Ergonomically designed tool grip with non-slip grip for comfortable all-day use

The rotatable cutting head ensures proper positioning and uniform cutting surface pressure

Easy to replace, hardened steel blade with 4 cutting edges for longer testing

Suitable for coating thicknesses up to 250 μm (10 mm), depending on the blade and standard

Available in a wide range of 4-in-1 cutting blades with different standards, coating thicknesses and substrates, the tool is compatible with all DeFelsko cutting blades

Illuminated magnifiers with 3x or 10x magnification are available according to the standard

A brush is included to remove debris from the coating

Adhesive tapes are available in accordance with ISO 2409 or ASTM D3359

The durable hard-shell case keeps the contents safe

Meets standards

ISO 2409/16276-2, ASTM D3359, AS 3894.9/1580.408.4, JIS K 5600-5-6.

Optional kits

The PosiTest CH Cross Scratch Adhesion Test is available in 5 sets, 3 of which are ISO 2409 compliant and 2 are ASTM D3359 compliant.

Use the table below to select the appropriate blade based on the standard and the thickness of the coating to be tested.

Packing list：Host X1, operation manual X1, waterproof bag X1

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.