GERUISI GRS-RY200 hot press shaping machine, soft pack lithium battery hot press shaping

GRS-RY200

Hot press shaping machine

Single station structure, with light curtain protection device, can adjust the hot pressing time, temperature, pressure, can use electrical control automatic operation, for the cell after winding hot flat pressing shape.

Introduction

GRS-RY200 hot pressing and shaping machine is mainly suitable for hot flat pressing of batteries after winding, which is convenient for entering the shell. The wound cells are placed on the template to shape the cells through pressure and heating to achieve the same thickness of the cells, reduce the elasticity of the cells, reduce the short circuit rate of the installed cells and ensure the consistency of the thickness of the finished cells.

Operating Principle

This equipment uses a thermostat and thermocouple to control the heat transfer and pressure-feeding template of the heating tube to reach the set temperature, and then under the action of the cylinder, the upper and lower templates are pressed on the cells, and the heat of the heating template is transferred to the cells, so that the cells can be stably formed under a certain temperature and pressure.

Features

• The temperature of the work surface can be adjusted through the buttons of the thermostat panel. The current value and the set value of the set temperature can be displayed through the LCD display screen, which is intuitive and clear, has high temperature control accuracy, and is easy to operate;

• The pressure of the upper and lower working surfaces can be adjusted by the pressure regulating valve to achieve the requirements of different process parameters;

• This machine adopts a single station structure, the upper and lower table panels have high parallelism, and the structure is stable and reliable;

• The work surface is made of high-quality materials, with good heat transfer effect, saving power consumption and improving work efficiency;

• Adopt light curtain protection device, safe to use;

• This machine has abnormal temperature alarm function;

• The hot pressing time, temperature and pressure can be adjusted;

• This machine adopts automatic and semi-automatic control, which is convenient to operate;

• Small size, can save space;

• Exquisite appearance, sheet metal adopts three-dimensional geometric design, simple and beautiful;

• Electric control can be used to run automatically during operation, and manual functions can be used during debugging.

Equipment composition

This machine consists of the following parts

1. Mechanical part: upper template mechanism, lower template mechanism, Heating Plate mechanism, heat insulation plate mechanism, guide mechanism, outer cover frame mechanism, base mechanism, etc

2. Electrical part: light curtain, solid state relay, solenoid valve, photoelectric switch, etc

3. Main components

Cylinder: SMC/AIRTAC

Heating tube: domestic (CN) high quality

Linear bearing: NSK domestic (CN) high quality

Middle relay: Omron (imported from Japan)

safety protection

1. Light curtain protection, cover protection

Packing list：machine X1, manual X1, certificate X1, warranty card X1

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.