MODERNER SZQ-25 (ISO Bird-type) paints Film Applicator Moulding Film thickness 25μm

SZQ-25 (ISO Bird-type)

Film Applicator

Wet film thickness 25μm, Spreader width 100mm, accuracy +/- 2μm, suitable for Coating, paints, inks and other industries Preparative specific Film thickness film.

Introduction

MODERNER Wet Film Applicator, model SZQ-25 is an ISO Wet Film Applicator with a groove width of 100mm, the coating film thickness of SZQ-25 Wet Film Applicator is 25 microns, and the accuracy is ±2 μm. SZQ-25 Wet Film Applicator is suitable for preparing coating films of specific thickness in coatings, paints, inks and other industries.

Hardness value

The hardness value of SZQ-25 (ISO bird type) Wet Film Applicator is HRC48±2.

use material

SZQ-25 (ISO bird type) Wet Film Applicator is made of 9Cr18Mo high carbon chromium stainless steel, 9Cr18 is high carbon chromium martensitic stainless bearing steel. It has the advantages of high hardness and wear resistance.

Steps

(1) Place the sample on the platform and fix the sample to ensure that the Wet Film Applicator does not move when it slides over.

(2) According to the required wet film thickness requirements, select a Wet Film Applicator of the corresponding specification, and place it on the short side of the sample, close to parallel or at a specified position.

(3) Pour about 5 ml of the sample in front of the Wet Film Applicator, press both ends of it with your fingers, and slide at a constant speed of 150 mm/s to finally obtain a wet film with the required thickness.

(4) MODERNER SZQ-25 (ISO bird type) Wet Film Applicator is cleaned and dried with a suitable solvent after use, and the surface is coated with oil or petroleum jelly.

Pictures

Packing list：Applicator x1

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.