MODERNER SZQ-50 (ISO Bird-type) wet-film manual Film Applicator 50μm scraper

SZQ-50 (ISO Bird-type)

Film Applicator

Wet film thickness 50μm, Spreader width 100mm, accuracy +/- 2μm, widely used in Coating inks industry, Moulding uniform, high mass.

Introduction

SZQ-50 manual Film Applicator is a MODERNER ISO bird-type wet Film Applicator, which is made of high-hardness anti-corrosion stainless steel. The film thickness of SZQ-50 is 50μm, the coating width is 100mm, and the accuracy is ±2 microns. ISO manual Film Applicator is mainly used to apply wet film with specified thickness to measure the hiding power, color and other properties of paint samples. It is widely used in the paint and ink industry, with uniform film production and high quality.

Hardness value

The hardness value of SZQ-50 (ISO bird type) manual Film Applicator is HRC48±2.

use material

SZQ-50 manual applicators are made of 9Cr18Mo high carbon chromium stainless steel, 9Cr18 is high carbon chromium martensitic stainless bearing steel. It has the advantages of high hardness and wear resistance.

Steps

(1) Place the sample on the platform and fix the sample to ensure that the Wet Film Applicator does not move when it slides over.

(2) According to the required wet film thickness requirements, select a Wet Film Applicator of the corresponding specification, and place it on the short side of the sample, close to parallel or at a specified position.

(3) Pour about 5 ml of the sample in front of the Wet Film Applicator, press both ends of it with your fingers, and slide at a constant speed of 150 mm/s to finally obtain a wet film with the required thickness.

(4) MODERNER SZQ-50 wet Film Applicator is cleaned and dried with a suitable solvent after use, and the surface is coated with oil or petroleum jelly.

Pictures

Packing list：Applicator x1

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.