Duban DB20-LX-DO DO Shore Shore DuroMeter brochure

Related products

DUBAN DB20-LX-MF memory sponge Hardness Gauge
LCD display0.1HMF≤1HMF

¥2288.0
SE
DUBAN DB22-VM260A20 Vibrator, circumferential displacement D 0.001~ 20.0mm
Displacement D: 0.001~ 20.0mm (peak-to-peak P-P); Speed V: 0.01~ 2000.0mm/s (true RMS); Acceleration A: 0.1~ 2000 m/s ² (peak P); Frequency: 1~ 20,000HzDisplacement D: 5Hz~ 1KHz; Speed V: 5Hz~ 1KHz; Acceleration A: 5Hz~ 10KHzTemperature: 0~50 ℃; Humidity: < 90%

¥4420.0
SE
DUBAN DB25-207FM-1KN Integrated Force Gauge Built-in push-pull force meter
±100kgf;±100000gf;±4980N;±220Lbf0.01kgf;0.1N;0.1LbfLevel 0.2

¥2574.0
SE
DUBAN DB20-SRT231 sand blasting shot peening Surface Roughness Tester
LCD display+/- 5% or +/- 5a0.1 μm (Measured value < 100 μm)

¥2574.0
SE
DUBAN DB20-LX-F sponge Hardness Gauge
4 position 10 mm LCD0~100 HF10~90 HF

¥2288.0
SE
DUBAN DB22-TM275P Transmittance meter protective film, PC, acrylic and other light transmitance measurement
0.0%-100.0%% beam of light transmission<30mm

¥2860.0
SE
DUBAN DB20-LX-T10 Spinning & weaving Hardness Gauge
Hardness/Average/MAX MaximumSpherical 10mm φThe curved end of the probe is used for bobbins with a diameter of less than or equal to 400mm, and the flat end of the probe is suitable for bobbins with a diameter greater than 400mm

¥2574.0
SE
DUBAN DB22-TM240T3 Penetrating coating Ultrasonic Thickness Gauge
Two Operating Modes of thickness measurement, single point mode and scan modeLCD with backlightEcho mode: 3mm~ 30mm Pulse echo mode: 1.00mm~ 300mm (steel)

¥2288.0
SE
DUBAN DB22-UVA/B/C/UVV UV Irradiometer, Multi-band Peak 315-420nm
UV Multiband (315-400) (280-315) (200-280) (340-420)LCD screen2.000mW/20.00mW/200.0mW/cm²

¥6435.0
SE
DUBAN DB25-204SPT 5KN Ponzi Tensiometer, Range +/- 4900N
0.01kgf (<100kgf)、0.1kgf (≥100kgf)；0.1N (<1000N)、1N (≥1000N)；0.1Lbf (<1000Lbf)、1Lbf (≥1000Lbf)Level 0.5+/- 0.5% FS (range) +/- 1 digital peak

¥3146.0
SE

Recommended for more brochure