Duban DB25-204G Grain feed pellet duroMeter Manual,OI

度班 DB25-204G 谷物饲料颗粒硬度计操作说明书第1页

度班 DB25-204G 谷物饲料颗粒硬度计操作说明书第2页

度班 DB25-204G 谷物饲料颗粒硬度计操作说明书第3页

度班 DB25-204G 谷物饲料颗粒硬度计操作说明书第4页

度班 DB25-204G 谷物饲料颗粒硬度计操作说明书第5页

Continue to read

Related products

ShenyangTX W-B92 Webster Hardness Tester (stainless steel) for measurement austenitic stainless steel and soft steel plate strip
0~20HW (equivalent to 50~92HRB)0-5HW（5-17HW）0-5HW（5-17HW）

¥5600.0
SE
LANDTEK FHT-05 fruit Hardness Gauge 0.2~ 5.0 kgf/cm ²
kgf(kgf/cm2)、lbf(lbf/cm2)、N(N/cm2)、Pa3.5mm 0.2~5.0 kgf/cm2

¥1180.0
SE
HBO SOO-J digital hardness gauge test stand, fixed load weight adjustable horizontal table
≤180mm165*145*380mm5kg

¥850.0
SE
LANDTEK HT-6510S-B Sand surface Hardness Gauge Fine, coarse sand type/core
2.50mm980g50g

¥1580.0
SE
Pap Hardness Gauge BA-1 Hypertherm, Pap Hardness Tester
0~100HBa, equivalent to 25~ 135HBW81~88HBa±1HBa、42~48HBa±2Hba81~88HBa±1.5HBa、42~48HBa±2.5HBa

¥3460.0
SE
ShenyangTX W-BB75 Webster Hardness Tester for measurement of copper pipes, plates and strips
Φ10mm6mm0~20HW (equivalent to 30~96HRF)

¥5600.0
SE
ShenyangTX W-20b Webster Hardness Tester for Small Aluminum Profiles and Aluminum Pipes with an Inner Diameter Greater than 6mm
Φ6mm8mm0~20HW (equivalent to 20~110HRE)

¥6600.0
SE
LANDTEK FM-204G Feed grain Hardness Gauge
0Kgf-20Kgf,0N-196N,0F-4426F0.01Kgf,0.1N,0.0126F15mm

¥1800.0
SE
AMITTARI AS-120DW Wood surface Hardness Gauge indentation Hardness Gauge
≤ ±1 HDHardness/Average/** ValueHD

¥1600.0
SE
DUBAN DB20-LX-T5 Spinning & weaving Hardness Gauge
Hardness/Average/MAX MaximumSpherical 5mm φThe curved end of the probe is used for bobbins with a diameter of less than or equal to 400mm, and the flat end of the probe is suitable for bobbins with a diameter greater than 400mm

¥2574.0
SE

Recommended for more manual