MODERNER SZQ-300 (ISO Bird-type) Film Applicator 300 micron Moulding Film thickness

SZQ-300 (ISO Bird-type)

Film Applicator

Wet film thickness 300μm, Spreader width 100mm, accuracy +/- 6μm, stainless steel material, in line with ISO standards, suitable for Paints, Coating and other industries to do film proofing.

SZQ-300 Film ApplicatorIntroduction

MODERNERal coating coater, model SZQ-300, is a stainless steel single-sided coating coater with a groove width of 100mm, and the SZQ-300 coating film coater has an accuracy of ±6 μm and a coating film thickness of 300 μm.SZQ-300 coating film coater is suitable for coating film proofing in pigment paint, coating and other industries.

Operating Principle:

(1) Place the sample on the coating platform and fix it, and do not move it when the Wet Film Applicator slides over.

(2) According to the required wet film thickness, select the appropriate type of Wet Film Applicator, and place it on the short side of the sample, close to parallel or specified position.

(3) InSZQ-300 (ISO Bird) Single-sided Coating Film ApplicatorPour about 5ml of paint sample on the front of the project, hold both ends with your fingers, and glide at a constant speed of 150mm/s to finally coat it into a wet film of the required thickness.

(4) After use, the Wet Film Applicator should be washed and dried with solvent, and the surface can be coated with oil or petroleum jelly. (Note: Keep the wet Film Applicator dry when not in use.) ）

Application

SZQ-300 (ISO Bird Type)Film applicatorIt is used to coat wet films of specified thickness, and is suitable for coatings, inks, pigments and other industries.

Actual picture of the product

Packing list：Applicator x1

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.