Duban DB20-CM211S Split type coating Thickness Gauge brochure

Related products

DUBAN DB22-TM240B high-precision Ultrasonic Thickness Gauge 300mm/0.01mm
Ultrasonic 5MHz φ 80.5% H + 0.1 (H is the thickness of the material being tested)500~9000 m/s

¥3003.0
SE
DUBAN DB22-LX261L luminometer candle range 0~2000FC
liquid crystal0.01～50.00 Lux50.00～500.0 Lux

¥2860.0
SE
DUBAN DB10-4221 Acoustic calibrator Class 1
94dB and 114dB (based on 20µPa)Level 11000 + 0.1% Hz (thus correcting on A, B, C, D or Linear Frequency Weighting)

¥1950.0
SE
DUBAN DB22-FPM12KBAT Stroboscope, Battery 50-12000FPM
5-Position 10mm LCD display0.1FPM (below 1000 FPM); 1FPM (above 1000 FPM)50~12000 FPM

¥1950.0
SE
DUBAN DB25-204M Muscle Strength Tester Measurement range +/- 490N
±50kgf、±490N、±110Lbf0.01kgf、0.1N、0.1LbfWith backlight

¥2145.0
SE
DB25-207FM-500N Integrated Force Gauge Sensors
±50kgf;±50000gf;±490N;±110Lbf0.01kgf;0.01N;0.1LbfLevel 0.2

¥2145.0
SE
DUBAN DB22-DT237PC Intelligent Rotation speed meter
LCD backlight displayLaser: 2.5-99, 999 r/min; Contact: 0.5-19, 999 r/min; Linear velocity: 0.05-1999 m/min; 0.2-6560 ft/min50~250Mm (typical) up to 600mm depending on luminance

¥1560.0
SE
DUBAN DB20-SRT231 sand blasting shot peening Surface Roughness Tester
LCD display+/- 5% or +/- 5a0.1 μm (Measured value < 100 μm)

¥2574.0
SE
DUBAN DB25-207FM-1KN Integrated Force Gauge Built-in push-pull force meter
±100kgf;±100000gf;±4980N;±220Lbf0.01kgf;0.1N;0.1LbfLevel 0.2

¥2574.0
SE
DUBAN DB10-3000 Wet Film Comb 25~ 3000 µm
polygon25~2032µmGB/T1764-79、GB/T134522-92、ISO2808-74

¥200.0
SE

Recommended for more brochure